Wilwood big brake kit 13", does anybody here have it installed? Options

[conus00]

I'm thinking about it.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWAX%3AIT

Pics?

Also, id it necessary to upgrade brake cylinder?

Thanks.

[conus00]

You have a 1.8 ST 7afe why on earth would you need these brakes? overkill much?

My brakes need to be done and I eventually WILL swap either 3sgte or built 5sfte in it. I like to plan ahead.

This post has been edited by conus00: Nov 11, 2010 - 9:36 AM

[whatthe]

You have a 1.8 ST 7afe why on earth would you need these brakes? overkill much?

My brakes need to be done and I eventually WILL swap either 3sgte or built 5sfte in it. I like to plan ahead.

Fair enough then go right ahead

[conus00]

You have a 1.8 ST 7afe why on earth would you need these brakes? overkill much?

My brakes need to be done and I eventually WILL swap either 3sgte or built 5sfte in it. I like to plan ahead.

Fair enough then go right ahead

Also, I have 18" wheels on my car and stock brakes just look tiny .

I need to save up a little bit because I want to do rear disc swap at the same time.
Almost there though...

[Mr_Tee]

You have a 1.8 ST 7afe why on earth would you need these brakes? overkill much?

My brakes need to be done and I eventually WILL swap either 3sgte or built 5sfte in it. I like to plan ahead.

Fair enough then go right ahead

Also, I have 18" wheels on my car and stock brakes just look tiny .

I need to save up a little bit because I want to do rear disc swap at the same time.
Almost there though...

Make sure to check the offset of your 18's to ensure spokes and caliper clearance.