clutch master went out AGAIN, guys whats causing this? im on my fourth master cylinder Options

[enderswift]

6gc i need your collective hive mind O.o

I've had to change my clutch master cylinder 3 times after rebuilding the factory piece didn't work. I don't think I'm installing it wrong... if you can microwave cereal, then you have the skill-set to change your clutch master... There's really nothing you could mess up here. I've tried different types of brake fluid with no luck either. The fluid simply turns dark after a few weeks, then in a few months the clutch starts sticking to the floor. Keep in mind that I've been buying autozone and advance auto masters. . . but what are the chances that all four would crap out? Is the aftermarket quality really that bad??

This post has been edited by enderswift: Nov 16, 2010 - 1:12 PM

[enderswift]

That was the first thing I tried when this problem originally presented itself but the clutch was still sticking to the floor. Changing the master solved it for a few months... So I switched back to the oem slave and have been changing the masters every couple months since.

This post has been edited by enderswift: Nov 16, 2010 - 1:13 PM