Changed: Bad Motor mount!, Need torque specs! Options

[blu94gt]

Ok, changed my topic. Popped my hood and took a quick look, it was obvious: Bad motor mount. Sorry for the crappy cell phone pic in the dark, but can you see how the engine is leaning toward the passenger side? The timing cover is pretty close to resting on the side of the mount.

What brand and where should I order new mounts? I figure I'll just knock all of them out at the same time.


This post has been edited by blu94gt: Dec 6, 2010 - 2:03 PM

[blu94gt]

before you order the mount, i would check the 3 bolts that hold the mount bracket to the motor, the 2 14mm's that bolt the the engine bracket to the mount, and the one under the mount itself.
chances are, one of those has worked itself loose.

You know, it's funny I just checked those about 30 seconds ago and the ones on the engine have worked loose. I have a cherry picker here at work to lift the motor up but no tools, so I'm going to limp it home and get it put back on tonight. The mount has pushed thru my timing cover but it doesn't look like it's making contact with the belt so I think I'm good (plus I've already driven like this for 60+ miles, another 10 isn't going to hurt)