Rough Idle/Engine Noise, I made a short video rather than explaining the noise. |
Rough Idle/Engine Noise, I made a short video rather than explaining the noise. |
Dec 5, 2010 - 12:48 AM |
|
Enthusiast Joined Oct 24, '10 From Chicago Currently Offline Reputation: 0 (0%) |
So my car idles rough at 800RPMS, but goes away @1000RPMS. It's even worse when in drive. If I'm at a stop light it vibrates hard, but as soon as she get's a little gas it stops. I'm waiting till about 200 miles before my oil change to do the seafoam treatment in hope that it helps. But if that's not the solution I'm wondering what is? I also have replace the ignition coil because I believe I saw somewhere on here that it worked for someone, but no avail.
Also while I'm hovering around the engine(in the video) I'm curious to know if any of those noises are normal for an older engine, or if it's something that needs to be fixed. This is my work car so I need it to... work. The belts are bad so try not to focus on their noise. Hopefully one of you can help me out. Thanks. http://www.vimeo.com/17483622 NOTE: When I place the camera on the steering wheel, I was hoping you could visually see the vibration through the camera. But apparently it did not work. This post has been edited by clownpRon: Dec 5, 2010 - 3:23 PM |
Dec 5, 2010 - 1:17 AM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
Sounds to me like you need a valve adjustment. My 7AFE sounded just like that, I got a valve adjustment, and it went away.
But that's not what's causing the vibration. I'd do what you're going to do about the seafoam, maybe reset your ECU. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Lo-Fi Version | Time is now: December 4th, 2024 - 5:49 PM |