blown motor..., he done blow'd it up good! (carnage pics inside!!) Options

[presure2]

so ~9 months or so ago, i picked up a 95 GT for my nephew, josh.
he paid 400$ for it, it had a broken water pump which i replaced with one i had in the garage at the time.

he called me a couple days ago, and said "hey...somthing went wrong with the car,...i was driving to work on the highway, when all of a sudden, i lost all power, followed by loud knocking noises and smoke ect from under the hood. i pulled off the road, and a huge puddle of oil formed under the car"

so i told him he prolly threw a rod, and to have the car towed here today.

a few hrs ago, it got here, and this is what i found:



#1 rod decided it needed some air.

pulled the motor out a little while ago, and from just looking at it quick, it looks like it may have spun a bearing, and locked up on rod, which caused the rod bolts to snap...or maybe the rod bolt just took a crap. ill get better pics of it tommorow when we tear it down to install the accessories onto the replacment motor which i had in the garage from my cousins mr2, which actually was itchyb's old motor, from back in the day before he swapped.
the back story on it goes somthing like this...it started in itchys celica, which he turboed, blew up 2 turbos with (yes, blew up turbos, not the motor) when he swapped, he sold the motor to my cousin, with just under 100k on it. my cousin and i swapped all the mr2 stuff onto it, and he drove it around till just a couple months ago when he swapped in a 3rd gen. he was planning on tearing it down to a long block to go into storage, but i got this call before he could..lol

a couple more pics of the carnage for your veiwing pleasure:







when this crap happens, it makes a MESS of the engine bay!!



tommorow, ill transfer everything over to the other motor, and install it.
nice quick turnaround.
more pics tommorow!

[Bitter]

A mess? Isn't that how those engine bays normally look? lower 1/2 soaked in engine oil for corrosion protection