Mak5603's Project, Dual tip exhaust and splitters on! Options

[mak5603]

I've always wanted to make a progression thread, just can never find the time to, and the more i modify my Celica, the more I wish I had one. So I decided before it gets too late or I lose all my pictures, I will post one now, right before I swap my motor. A little background info, my name is Matt, I'm 21 and my 1995 Celica GT was my first car. I've always been into cars and modified cars so as soon as I got it, there were lots of things I had planned for it. However, still being a kid had no money to fund any big projects, until I got a job...Here are some pictures of my cars evolution to the point where its as now. Enjoy I will try and keep this as updated as I can from now on.

Here's where I started...

Just a stock black celi...


Wanted to do things, but had no money, so I painted my stock GT wheels red.


First performance mod was a v2 TRD Quick Shift Kit, was VERY happy with it, bought some GT4 spoiler blocks, while in the paint process, tried spoilerless, not my thing.


Painted my blocks myself, put em on.


If you ever are wondering USDM tail light or JDM taillight? JDM ALL THE WAY!



My winter set of wheels are those stock GT ones.
Basically, I fell in love with OEM JDM from there on, and the real transformation started. I fell in love with GT4's, learned A LOT about them, and ended up purchasing a project car (ST-165) so funds halted on the 6gc





Winter time came and my birthday is 4 days after xmas so I got a decent chunk of cash and help getting this.


As you can see, it needed A LOT of work, but I was 100% committed to doing all the work on it myself and getting it on my car. Bought so many parts for it, got really used to seeing this.


While the work was getting done on the 4 front end, got some new wheels.



HID's too.


Front end on! And some OEM '98 skirts!



Spacers!


Like I mentioned earlier, my car is waiting on the arrival of a 3rd gen 3S-GTE motor set from _Jim_. I am extremely excited to start the swap. These are not mounted yet, but here will be what my gauge setup will look like. I also purchased an Apexi AFC NEO to be put where the cigarette lighter currently is.


Thanks for looking.

This post has been edited by mak5603: Jul 12, 2012 - 1:59 PM

[mak5603]

I don't have pictures of the whole removal process and it's too cold to go outside and do it all right now, but the paint kit that I used for all of the calipers that I've painted is this one:



I like this stuff A LOT more than spray paint personally. You start off by spraying it with the included caliper cleaner, get an old toothbrush or something and really clean it off. Tape off any part you dont want paint on (pistons, bleeder things [for lack of technical term], etc.). Shake/stir paint, and begin aplying to the calipers with the brush. I personally go out and buy another brush when I use this kit as the included brush is awful and the bristles fall out extremely easily and end up trying to dry into your wet paint. Anyways, just put down a layer and it will look REALLY BAD with only one layer, don't stress, just let it dry and add another layer, and repeat until it's your desired thickness and color.

Again, I like this paint because it has ceramic in it and is very resistant to heat, brake dust, fading, chipping, etc. They are really easy to clean with this paint on as well, it coats them very nice. Many people who use spray paint end up having to repaint their calipers every couple years because of the fading, chipping, etc. So far I've never had to repaint my calipers and they still look great up close, imo.

Hope this helps you out man.

[eboz74]

I don't have pictures of the whole removal process and it's too cold to go outside and do it all right now, but the paint kit that I used for all of the calipers that I've painted is this one:



I like this stuff A LOT more than spray paint personally. You start off by spraying it with the included caliper cleaner, get an old toothbrush or something and really clean it off. Tape off any part you dont want paint on (pistons, bleeder things [for lack of technical term], etc.). Shake/stir paint, and begin aplying to the calipers with the brush. I personally go out and buy another brush when I use this kit as the included brush is awful and the bristles fall out extremely easily and end up trying to dry into your wet paint. Anyways, just put down a layer and it will look REALLY BAD with only one layer, don't stress, just let it dry and add another layer, and repeat until it's your desired thickness and color.

Again, I like this paint because it has ceramic in it and is very resistant to heat, brake dust, fading, chipping, etc. They are really easy to clean with this paint on as well, it coats them very nice. Many people who use spray paint end up having to repaint their calipers every couple years because of the fading, chipping, etc. So far I've never had to repaint my calipers and they still look great up close, imo.

Hope this helps you out man.

i painted mine with the same brand