Rattle/Scratching Clutch/Flywheel., best i can describe as |
Rattle/Scratching Clutch/Flywheel., best i can describe as |
Dec 26, 2010 - 11:09 PM |
|
Enthusiast Joined Nov 27, '09 From Canada Currently Offline Reputation: 4 (100%) |
so when i start my car, usually on cold days, i hear kind of like a mix of scratching and rattling in the engine bay. I say scratching cause i found out that when i press the clutch the sound goes away. When I let go it comes back. Now this is only when i start the car and it goes on till i drive. After driving it's not present. Since the sound goes away when i press the clutch i was guessing somewhere along the "Clutch disk rubbing on the flywheel" area. Any input will be greatly appreciated thanks.
|
Dec 31, 2010 - 3:08 AM |
|
Enthusiast Joined Dec 11, '10 From qc Currently Offline Reputation: 0 (0%) |
worn input shaft bearing... you need to remove and open the tranny to change the front and rear input shaft bearing.. i have the same issue and my ST tranny (C52) is open on the floor of my garage ... if you have some puller and a press you can do that in two days... i have some pics if you want just let me know
This post has been edited by h4rfang: Dec 31, 2010 - 3:08 AM |
Lo-Fi Version | Time is now: November 24th, 2024 - 9:31 PM |