6G Celicas Forums

Welcome Guest ( Log In | Register )

> feeler FS: 7afte setup, going through my options
post Jan 17, 2004 - 2:21 AM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




7afe turbo kit

Includes:

T3 turbo (under warranty)
Custom down pipe
Jgs tools manifold
Dr Catback exhaust piped out the back with dual tips
Turboxs MBC
Short ram intake and filter
Vortech 12:1 FMU with fuel lines
Walbro 255lph supra fuel pump
Hose for catch can installation (had a water bottle as a catch can)
Jgs tools oil feed line kit
Custom oil return line
Pre tapped and fitted oil pan
Greddy universal IC piping kit
FMIC
BOV
Air lines
Check valves for the MAP
SAFC2
Dual gauge pod
AFR gauge
Boost Gauge
Blitz dual turbo timer (bought it damaged, works as far as I know)
roll of paper gasket for downpipe to B pipe gasket

total cost to me-$3500(and countless ours of working out the kinks in the setup)

its a full kit, get a new exhaust manifold gasket(they are one time use) and you can probably install it in 1-2 days if you know what you are doing and have a good set of tools.

melting one of my pistons didnt go over too well with my parents, so my dad is(for now) asking me not to put the turbo stuff back on. BTW, the cause of the piston was it was weakened when the stock fuel pump failed, this kit includes a brand new walbro 255lph pump

i will be going to college after this summer and he wants me to have a 100% reliable car to drive everyday(for summer job and college if i live at home) he said that it would be ok to sell the mazda i got from my grandpa and buy what ever other car i want to "**** around with" all i want.

the idea of a project car of my choice is very appealing

but before i do start making any plans i'd like to see how much demand there is for a FULL 7afte kit, it even includes a cat back exhaust

email me at yoohanna@pacbell.net or PM me here with any questions


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram
 
Start new topic
Replies
post Jan 19, 2004 - 11:55 AM
+Quote Post
SpedToe169



Enthusiast
***
Joined Aug 29, '02
From Dallas, Tx
Currently Offline

Reputation: 0 (0%)




I'm going to buy a miata to drive while I work on the celi. Then I'm going to build the miata. I found one that needs a tranny for $1500. I think I can find a tranny for around $500. Its a 1.8 so there are turbo kits everywhere. With a little attention to detail I should have it down to 2300lbs with driver....about 180hp with the turbo...sounds like fun to me. All for under 7k.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 3:56 PM