 new question, cranking but won't start, and a plug and something e, HELPPPPPPPP |
 Jan 18, 2011 - 4:17 PM
|
 
|
 Enthusiast  Joined Oct 7, '09 Currently Offline Reputation: 8 (65%)  |
okay, as some of you may know i swapped my 94 engine into my 97 st with only minimal changes as switching over all
the accessories and intake. and now that i'm wiring it all back together and running all the hoses and vaccume lines, i noticed some of the places where hoses should be ran there are some caps on the intake? i don't know if i should take them off and run hoses or leave them on? one is on the top of the intake, and the other is on the bottom.... if it helps the 97 was a standard, and the 94 was an auto.... also, does anyone have some close of pictures of where all the hoses/vac lines go? i know i was told to just look at the diagram on the firewall, but that can be confusing at times , and it doesn't have all of the hoses... also there is one other thing i'm curious of, over by the power steering pump on the bottom passenger side, there is a long hose/tube that comes from the driver side and has an open hole/connecter on the end, kind of looks like the same thing as the shifting cable ends..... but i don't know where it goes either... i can try and get pictures up later, but i still cant find my camera... so some pictures of how its all supposed to be ran would be very much appreciated.. thanks guys This post has been edited by NOVAKx17: Jan 21, 2011 - 9:34 PM -------------------- NOVAKx17
2000 Eclipse GT- DD=== oil pump went blown up and sold 1997 Celica ST- swapped and sold 2004 Ford explorer xlt 4x4- totaled 1997 Celica Convertible GT- Going Topless (; (18:32:21) yarik83: axel has a sensitive wife. i hear she used to be a lesbian and then became ferdi ( PARTING OUT A GT COUPE http://www.6gc.net/forums/index.php?showtopic=88592 ) |
 |
Replies
|
Jan 18, 2011 - 6:16 PM
|
|
|
Enthusiast Joined Dec 30, '09 From Wilmington, NC Currently Offline Reputation: 1 (100%) |
i can go snap a pic if you still need it
|
Posts in this topic
NOVAKx17 new question, cranking but won't start, and a plug and something e Jan 18, 2011 - 4:17 PM
mkernz22 who need vac lines? just cap them all off haha
... Jan 18, 2011 - 5:03 PM
NOVAKx17 i was thinking the only difference might of been o... Jan 18, 2011 - 5:09 PM mkernz22 I wouldn't think so cause with the 5s, i took ... Jan 18, 2011 - 5:24 PM NOVAKx17 hmmm ... not sure but i would like to get this fig... Jan 18, 2011 - 5:30 PM NOVAKx17 that would be awesome if you don't mind.....
... Jan 18, 2011 - 6:17 PM al94st Can't get a good photo right now of driver... Jan 18, 2011 - 6:37 PM NOVAKx17 thanks... yours is a little more clear than mine, ... Jan 18, 2011 - 6:40 PM presure2 QUOTE (NOVAKx17 @ Jan 18, 2011 - 6:4... Jan 19, 2011 - 10:10 AM NOVAKx17 wow, i'm dumb... is that little bar in the bac... Jan 19, 2011 - 10:16 AM al94st start with the items on the picture that aren... Jan 18, 2011 - 6:43 PM presure2 the one thats labeled "pipe" in the uppe... Jan 19, 2011 - 5:31 PM NOVAKx17 Okay, thanks manny...
GOOD NEWS. i have all the ... Jan 21, 2011 - 10:45 AM presure2 the last pic, of the banjo fitting looks like the ... Jan 21, 2011 - 10:48 AM NOVAKx17 ok, so it goes to the power steering pump then?
... Jan 21, 2011 - 10:50 AM stephen_lee that connector looks like coil power.. ya might wa... Jan 21, 2011 - 11:32 AM NOVAKx17 no, it doesn't plug into the dizzy, there is o... Jan 21, 2011 - 7:21 PM presure2 QUOTE (NOVAKx17 @ Jan 21, 2011 - 7:2... Jan 22, 2011 - 8:15 AM NOVAKx17 really? i looked on the dizzy after he said that ,... Jan 22, 2011 - 10:16 AM presure2 ok.
reading the whole thread again, you used a 94 ... Jan 22, 2011 - 10:33 AM NOVAKx17 okay i can take some pictures when i make it home ... Jan 22, 2011 - 10:40 AM presure2 sorry i edited my post as you were posting..lol Jan 22, 2011 - 10:41 AM NOVAKx17 ha it happens, but yeah, i'll take some pictur... Jan 22, 2011 - 10:45 AM NOVAKx17 okay, still haven't been able to take pictures... Jan 24, 2011 - 10:14 AM presure2 i need pics! Jan 24, 2011 - 11:09 AM NOVAKx17 hopefully can get pictures tonight, but i tried th... Jan 24, 2011 - 3:41 PM stephen_lee you have an intact timing belt right? Jan 24, 2011 - 5:48 PM NOVAKx17 by that i'm guessing you mean its on and tensi... Jan 24, 2011 - 5:55 PM njccmd2002 before you continue any further, you need to find ... Jan 25, 2011 - 6:18 AM NOVAKx17 okay, still wasn't able to find my camera, but... Jan 25, 2011 - 4:07 PM mkernz22 it looks like someone really hacked up that engine... Jan 25, 2011 - 4:12 PM NOVAKx17 mysterious plug went to the o2 sensor on the heade... Jan 25, 2011 - 10:53 PM stephen_lee ok that center wire on the dixy cao goes to your c... Jan 26, 2011 - 12:31 AM Spider77 Glad that the mystery plug was taken care of. Get... Jan 26, 2011 - 8:11 AM NOVAKx17 okay well i couldn't find my meter today so i ... Jan 26, 2011 - 6:04 PM mkernz22 so did you swap the 94 head out for the 97 head?
t... Jan 26, 2011 - 6:45 PM stephen_lee i doubt thts the issue. the oilpump, dizzy, misc s... Jan 26, 2011 - 10:53 PM NOVAKx17 exactly.... so i'm thinking i might take apart... Jan 27, 2011 - 7:51 PM NOVAKx17 Well i've decided that i'm going to tough ... Jan 31, 2011 - 10:16 AM stephen_lee fail. Jan 31, 2011 - 1:22 PM Black0nBlack94 Ok, Im no master tech. here but if I was to guess ... Feb 3, 2011 - 8:53 PM al94st Did they ever get this thing running? Feb 10, 2011 - 3:50 PM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 5:40 AM |