 GT-FOUR El Franjeado, EFR turbo etcq |
 Jan 19, 2011 - 10:55 AM
|
 
|
|
Enthusiast  Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%)  |
I'll take advantage of this and say hello as this is my first post in this forum. I recently acquired a GT-Four from 1999 randomly traded my 2003 celica Gt JDM ofcourse was a neat ride but too low gas mileage was good beat the **** out of the car and of course... wrong wheel drive :S... So I kept driving past this pretty GT Four and I decided to check it out the next day... My cars underside was beat to hell ( rocky roads speed bumps carter looked like muhamed ali punched it) He said No mechanics or the deals always go sour, sure what the hell my car was beat to **** and ate cans of oil. I tested it and sure for me it was like driving a missile. So now the details, I liked that it had a nice thick Aluminum KOYO racing radiator and a Cusco alloy strut brace and a sweet japanese roundish air intake and 57K kilometers on the Odo...the limited 300km/h TRD speedo so I was turned on by this and the next day I was drivin this gas guzzler home...No surprise it had problems....
So the damage is this blown turbo seals no idea of what the engine condition is my intake manifold and everything else is covered inside with oil... I came to the US and bought basically 2 grand worth in parts didnt have that much money so I had to compromise, Heres the list, try not to cringe. Im basically gonna slap all this **** together and see if it works... GODSPEED KKR 480 Twin scroll turbo ( says its 450HP capable I'm aiming at 350) 4 Iridium spark plugs heat range 7 HKS SSQV black limited edition BOV AEM Water/Meth Inj 5 Gallon tank (our gas aint so purdi) Ebay oil catch can Timing belt set with new water pump (dont need the water pump but taking it as insurance anyways) ACT 6 puc clutch disk ( stock clutch slips a bit under high rev launching) crappy chinese AFR narrow band digital clockything (just so it tells me Im not melting pistons  25mm ebay wheel spacers ebay electronic boost controller ebay n1 carbon fiber burnt tip muffler electric exhaust cut out from Raceland USA carbon fiber raiser blocks from hong kong and the normal GT four wing for 40$ off a local supra guy. cheap 25$ bishieclipse FCD Ill try to update once I get to Paraguay and slap all this stuff on, Should be fun to see the results... Cheers This post has been edited by Neon90424: Sep 8, 2012 - 6:06 AM -------------------- |
 |
Replies
|
Jan 22, 2011 - 7:59 PM
|
|
|
Enthusiast Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
No ideas? Well I'm flyin' back tomorrow So expect lots of pics and questions by next week. Get this GT-Four back to impreza spankin badboy status
-------------------- |
Posts in this topic
Neon90424 GT-FOUR El Franjeado Jan 19, 2011 - 10:55 AM
gt4st205 Thats a very nice 205 you got there(saw the pics o... Jan 19, 2011 - 11:05 AM Neon90424 I've got 2 vids I'll post pics that i can ... Jan 19, 2011 - 11:09 AM Neon90424 When i first got it at our first GT4 club meeting ... Jan 19, 2011 - 11:15 AM gt4st205 That's to bad about your front bumper, were yo... Jan 19, 2011 - 11:32 AM Neon90424 my profile pic is the current pic I fixed the body... Jan 19, 2011 - 11:34 AM gt4st205 Glad you were able to fix it! Jan 19, 2011 - 12:15 PM Neon90424 I actually broke the pass side rear wheel holding ... Jan 19, 2011 - 1:40 PM Neon90424 Anyone got any predictions? I don't know if ... Jan 19, 2011 - 6:17 PM presure2 my prediction is not to install that FCD.
itll loc... Jan 19, 2011 - 7:38 PM Neon90424 Turbo Specification:
Maximum Horse Power
450HP
Tu... Jan 19, 2011 - 7:45 PM presure2 lmao! it will give you a pretty light show... Jan 19, 2011 - 7:57 PM 95st-celica lol.....i feel so bad for this poor car....and 57k... Jan 19, 2011 - 7:58 PM
Ted95 QUOTE (95st-celica @ Jan 19, 2011 ... Jan 28, 2011 - 3:51 PM Neon90424 you sure? why not? yeah...st205s go for 7 grand d... Jan 19, 2011 - 8:05 PM BriinumsBo half of the parts you listed are ricing blings use... Jan 20, 2011 - 4:28 AM Neon90424 thats only 3 things on there the BOV the muffler a... Jan 20, 2011 - 5:01 AM Culpable04 ok, un poco de ayuda.
nesesitas esta pieza para ... Jan 20, 2011 - 8:42 AM Neon90424 Ya compre Injeccion de Agua, Y el flange no es igu... Jan 20, 2011 - 9:05 AM presure2 QUOTE (Neon90424 @ Jan 20, 2011 - 9... Jan 20, 2011 - 9:20 AM Culpable04 CT20 flange is also divided ( twin entry ) but wha... Jan 20, 2011 - 9:19 AM Neon90424 oh how I hate propietary company bullsh*T why cant... Jan 20, 2011 - 9:31 AM 3WayStunna QUOTE (Neon90424 @ Jan 20, 2011 - 10... Jan 28, 2011 - 5:44 PM Sunny Hi,
sorry, does i ask you direct for the problem ... Jan 24, 2011 - 2:56 PM Neon90424 Its a twinscroll turbo that is divided T3, I have ... Jan 24, 2011 - 6:08 PM Neon90424 Alrighty folks I'm off to the mechanics expect... Jan 25, 2011 - 6:31 AM miguelst205 Jajajajaja..
Que bueno encontrar a algún paraguay... Jan 27, 2011 - 7:34 PM Smaay KEEP IT IN ENGLISH!!!!! this i... Jan 27, 2011 - 7:52 PM presure2 QUOTE (Smaay @ Jan 27, 2011 - 7:52 P... Jan 28, 2011 - 7:27 AM Culpable04 QUOTE (Smaay @ Jan 27, 2011 - 8:52 P... Jan 27, 2011 - 8:07 PM Neon90424 I have no plans to change the fuel system, Injecto... Jan 28, 2011 - 6:51 PM Sunny Hi,
the main problem of a 100% duty-cicle is that... Jan 29, 2011 - 5:00 AM Johnnyny obviamente tienes mucha ambicion hermano pero por ... Jan 29, 2011 - 5:41 AM 3WayStunna Well NEON90424 there are still some options that y... Jan 29, 2011 - 7:11 AM Neon90424 QUOTE (3WayStunna @ Jan 29, 2011 - 7... Jan 29, 2011 - 6:41 PM Sunny Hi,
i just want to say that it is possible with 5... Jan 30, 2011 - 5:52 AM Neon90424 ok thank you.
So consensus is that
With Wat/Met... Jan 30, 2011 - 6:48 AM presure2 QUOTE (Neon90424 @ Jan 30, 2011 - 6... Jan 30, 2011 - 12:29 PM bsamps4 I absolutely love this build. I can tell in your ... Jan 30, 2011 - 12:26 PM Neon90424 Yes obviously at fly wheel specs isnt the JDM spec... Jan 30, 2011 - 9:39 PM Neon90424 I just put in CF raiser blocks with the nice wing ... Jan 31, 2011 - 4:35 PM Neon90424 Ok I installed the AEM Wat/Meth and Teed up the di... Feb 8, 2011 - 8:04 PM 3WayStunna Umm, maybe im not understanding this correctly, bu... Feb 9, 2011 - 12:20 AM Neon90424 The water meth injection nozzle is hanging atm, th... Feb 9, 2011 - 8:21 AM Culpable04 take a picture of which line you used for the digi... Feb 9, 2011 - 9:17 AM Neon90424 Yeah I believe I am on safe mode...My boost contro... Feb 9, 2011 - 3:55 PM mkernz22 what do you mean by sparking the battery?
just unp... Feb 9, 2011 - 5:11 PM Neon90424 its just doughnuts over dirt man Its not like I... Feb 9, 2011 - 9:47 PM mkernz22 well i thought you meant on pavement lol but still... Feb 9, 2011 - 10:02 PM 3WayStunna Well firstly your oil problem might be an oil catc... Feb 10, 2011 - 1:42 AM Goonter QUOTE (95st-celica @ Jan 19, 2011 ... Feb 10, 2011 - 2:26 AM Neon90424 Or bought when the car came out Feb 10, 2011 - 8:55 AM Neon90424 I installed the wat injection im running like 55% ... Feb 10, 2011 - 11:44 PM 95celgt i have a feeling you need new pistons/rings.....th... Feb 11, 2011 - 12:28 PM Sunny Hi,
i don't know the conditions of your count... Feb 11, 2011 - 3:16 PM Neon90424 seriously just regular distilled water? why not re... Feb 11, 2011 - 8:08 PM Sunny Hi,
in most cases destilled water is aggresiv in ... Feb 12, 2011 - 5:58 AM Neon90424 why thanks for the Info, why does everyone on her... Feb 12, 2011 - 9:10 AM mkernz22 just put coolant in, stop beating around the bush ... Feb 12, 2011 - 10:21 AM mak5603 QUOTE (mkernz22 @ Feb 12, 2011 - 10... Feb 14, 2011 - 1:56 AM 3WayStunna I dont know why people insist on using anti-freeze... Feb 12, 2011 - 11:31 AM Neon90424 I put in water and then just drained it and put in... Feb 15, 2011 - 7:55 PM Neon90424 well the car is now at the mechanic and the engine... Feb 22, 2011 - 9:36 AM alex_xp Oye Neon90424 el auto te lo trajiste desde Iquique... Feb 22, 2011 - 10:21 AM Neon90424 Lo compre de una playa local y me imagino que este... Feb 22, 2011 - 11:04 AM alex_xp No, estoy en santiago, pero tengo varios amigos y ... Feb 22, 2011 - 11:28 AM miguelst205 People, please don't think that only exists pr... Feb 23, 2011 - 12:25 PM Neon90424 i'm fine by that its my car i am wrecking in t... Feb 23, 2011 - 12:53 PM Neon90424 According to my mechanic the windshield wiper flui... Feb 24, 2011 - 10:19 AM presure2 It depends on the brand. Most contain methanol as ... Feb 24, 2011 - 1:24 PM Neon90424 this one is just regular alcohol with water amonia... Feb 24, 2011 - 1:45 PM Culpable04 in warmer climate countries, they are not concern ... Feb 24, 2011 - 1:48 PM Neon90424 meth is almost 2$ per liter make that like 8... Feb 24, 2011 - 11:45 PM Culpable04 straight alky meaning straight alcohol ?
if so, ... Feb 25, 2011 - 12:19 PM Neon90424 what ratio do you recomend for a hot climate? Feb 26, 2011 - 11:23 PM Culpable04 50 / 50 has been proven to be the best of both wor... Feb 28, 2011 - 12:01 AM Sunny Hi,
methanol i very aggresiv especially to metall... Mar 1, 2011 - 5:44 PM Neon90424 Ok the turbo adapter should be done by today and i... Mar 4, 2011 - 7:06 AM Neon90424 Everything is going to come together tomorrow. Mec... Mar 15, 2011 - 7:16 PM Culpable04 make sure the turbo doesn't outrun your fuel p... Mar 16, 2011 - 8:39 AM Neon90424 Putting in my gearbox has been a major pain in the... Mar 19, 2011 - 9:19 AM Sunny Hi,
put out the engine is the best way to mount/d... Mar 20, 2011 - 7:39 AM Neon90424 Lol ok I'll tell that to them the next time w... Mar 20, 2011 - 10:14 AM Neon90424 Still on standbye any predictions as to power rang... Mar 25, 2011 - 11:13 PM delusionz Have you done anything about your low boost ct20b?... Mar 30, 2011 - 6:52 PM Neon90424 The low boost was the ecu's emergency mode and... Apr 2, 2011 - 11:06 AM Neon90424 Ok Now my mechanic said we are shooting for 20 psi... Apr 5, 2011 - 5:47 AM Culpable04 stock turbo + water injection + 20 psi is ok, as l... Apr 5, 2011 - 11:19 AM Neon90424 raising the fuel pressure with a 255LPH pump will ... Apr 5, 2011 - 10:16 PM Culpable04 Help ? yes, solve the problem ? no
you need to st... Apr 6, 2011 - 8:13 PM Neon90424 Wise wise wise wise very wise =)
Oh btw finding ... Apr 6, 2011 - 11:18 PM delusionz Hey are you up and running now? Do you have an AFR... Apr 7, 2011 - 4:47 AM 3WayStunna Wow, that engine bay looks like a mess..good luck ... Apr 7, 2011 - 8:10 AM Neon90424 Thank you guys. As of now Ive got 2 adapters but i... Apr 7, 2011 - 8:43 AM TRD_Ian there is no way of saying this with out sounding l... Apr 7, 2011 - 9:55 AM Neon90424 I see your point. There are plenty of ST 205´s do... Apr 7, 2011 - 1:46 PM Neon90424 Ok the turbo now doesnt fit because of the interna... Apr 18, 2011 - 1:20 PM Neon90424 turbo didnt fit at all because of the rad. fan. it... Apr 18, 2011 - 10:27 PM delusionz Hang in there buddy I'm in the same situation ... Apr 19, 2011 - 7:09 AM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 1:46 AM |