![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
I'm thinking of getting 15mm spacers up front and 25mm spacers in the rear. Will I need an alignment?
Also, I know the hub diameter is 54.1 mm, but what's the center bore? Is it the same? This post has been edited by HectortheRican: Feb 5, 2011 - 12:11 AM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 1, '09 From Norway Currently Offline Reputation: 2 (100%) ![]() |
Hiya Hector.
The center of my hub is 54.1 Think all celica's have the same dim. 94-99 atleast. But if i wheare you i would go for 15 front and rear. You are messing around whit the stability of the car when you have differnt spacer front and back. I was just advised about this so im not an expert. But the mechanic i spoke to told me that this is somthing you should try and avoid. Dont know if it cus i have a 4x4 or what but it kinda makes sense for me. As of the alignment, That i dont know. |
![]() ![]() |
Lo-Fi Version | Time is now: April 21st, 2025 - 6:41 PM |