 Power window is having trouble going up |
 Feb 5, 2011 - 9:30 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
Today when I went to make my window go up, about halfway, it stopped. So I took it back down a bit and brought it back up and I could hear the gears inside slipping and slowly but surely, my window made it back up. Would this be that the gears are loose? Or is the motor going bad? It's the driver side window, if that's relevant.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Feb 8, 2011 - 1:05 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
Does this only happen when its cold outside? If so, my passenger side window does the same thing. It will move terribly slow, sometimes it stops, and then it takes a few minutes before it will move again.
I'm wondering if something like grease is freezing??????? -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
|
Feb 8, 2011 - 2:08 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (samir0189 @ Feb 8, 2011 - 12:05 PM)  Does this only happen when its cold outside? If so, my passenger side window does the same thing. It will move terribly slow, sometimes it stops, and then it takes a few minutes before it will move again. I'm wondering if something like grease is freezing??????? Maybe... I haven't tried it again since Saturday because I'm a bit worried that I won't be able to force it up next time LOL That would be a good explanation though because I NEVER noticed any hesitating from the driver's side window, it was perfect. And then one day it was all THHHPPPPT. And it has been unusually cold here lately... so I'll check again. This post has been edited by HectortheRican: Feb 8, 2011 - 2:09 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Posts in this topic
HectortheRican Power window is having trouble going up Feb 5, 2011 - 9:30 PM
Spider77 Do you hear any type of grinding noise? Feb 5, 2011 - 10:05 PM Neon90424 sorry to thread jack but my windows suck too, If I... Feb 6, 2011 - 8:10 AM schmooot most of the time it is just a worn out motor, but ... Feb 6, 2011 - 12:16 PM Spider77 Or a bad strand of wire. Thats my ordeal now. Wi... Feb 6, 2011 - 12:37 PM HectortheRican Thanks Josh! Feb 6, 2011 - 2:29 PM SoDo I had the same problem before. Window would get st... Feb 7, 2011 - 2:14 AM Spider77 See, there ya go, pop the door panel and actuate t... Feb 7, 2011 - 6:42 PM tim86 my regulator is still bad too... been trying to ge... Feb 8, 2011 - 11:17 AM 96stgreendemon This is why i love manual windows and locks lol, h... Feb 8, 2011 - 12:01 PM
HectortheRican QUOTE (96stgreendemon @ Feb 8, 2011 - 11... Feb 8, 2011 - 12:08 PM Neon90424 My passenger window is the sluggish one of the 2 a... Feb 8, 2011 - 8:10 PM HectortheRican QUOTE (Neon90424 @ Feb 8, 2011 - 8:1... Feb 8, 2011 - 8:38 PM HectortheRican I haven't had time to check anything in the do... Feb 14, 2011 - 6:59 PM tim86 QUOTE (HectortheRican @ Feb 14, 2011 - 6... Feb 15, 2011 - 9:57 AM HectortheRican Damn.. well I'm going to have to make time soo... Feb 15, 2011 - 12:10 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 10:24 AM |