New alternator question Options

[Stu37363]

I installed a new alternator 170 amp. it seems to be working great. it drove to the gas station, but then for the first time in years my car wouldnt start and i had to roll start it today. ive got an optima yellow top battery.

I have upgraded the battery ground, but have not upgraded the alt to battery wire or the engine to chassis wire.

I was testing out my alt and was cranking out music, my speakers pulled about 60 amps and the speakers started to get fuzzy and quiet, so i turned the volumn down and revved the engine out of instinct, and it went away before i could figure out what was going on.

I know this is probably a stupid question, but is it possible i blew some charging fuse or something?

voltage shows 14.5 when running and was showing 11.5 when it wouldnt start.

Does the wire from the alt go straight to the battery, or does it split or get fused at any point?

Happy to give any more info, i just dont know what else you may need to know.

Thanks

[barterj]

You don't need to add a fused link from the alternator to the battery, that's built into one of the fuse relay/boxes, so you can get rid of that, and fuse for your audio system should be in the positive live to the amp. what does it do when you try and start it?

This post has been edited by barterj: Feb 26, 2011 - 10:42 PM