5sfe stops pulling above 4k rpms, :[ All you gearheads help me out! |
5sfe stops pulling above 4k rpms, :[ All you gearheads help me out! |
Jan 17, 2011 - 6:41 PM |
|
Enthusiast Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) |
There's not much else I can say to describe the problem. The engine runs amazing from idle to 4000, but then at 4k I can feel it stop pulling [as in the power just seems to stop] and it just kind of hesitates there and bucks a little bit. I dont want to blow it up so I upshift as soon as it starts doing it. I currently have no CELs, I checked the plug wires earlier and they look basically brand new and all seem to be connected properly. The prev owner was a member here and had NGK plugs put in. I'm thiking of replacing the plugs but not sure what else would cause this problem. Thanks for any input. |
Mar 5, 2011 - 9:17 PM |
|
Enthusiast Joined Apr 28, '09 From Auburn, AL Currently Offline Reputation: 0 (0%) |
FIXED!!!!!! Try, if you have not already, replacing the fuel filter. Mine was so clogged one could hardly blow air through it. hello 30 hp :}
FIXED!!!!!! Try, if you have not already, replacing the fuel filter. Mine was so clogged one could hardly blow air through it. hello 30 hp :} |
Mar 5, 2011 - 11:10 PM |
|
Enthusiast Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) |
FIXED!!!!!! Try, if you have not already, replacing the fuel filter. Mine was so clogged one could hardly blow air through it. hello 30 hp :} FIXED!!!!!! Try, if you have not already, replacing the fuel filter. Mine was so clogged one could hardly blow air through it. hello 30 hp :} I will have to try this. Where is the fuel filter located on the Celica? I'm gonna try plugs timing belt fuel filter |
Lo-Fi Version | Time is now: November 28th, 2024 - 2:50 PM |