Good 8" speakers for doors, After much debate, I have found a great set of 8's for doors |
Good 8" speakers for doors, After much debate, I have found a great set of 8's for doors |
Mar 11, 2011 - 1:21 AM |
|
Enthusiast Joined Apr 28, '09 From Auburn, AL Currently Offline Reputation: 0 (0%) |
I looked everywhere, both in car audio and home audio sites/companies and have found what i believe to be the best set of 8\'s for the buck the will ACTUALLY fit with no modification. They are home theater speakers, so they are very efficient (50watts max rms, sensitivity 84dB @ 33hz) and can reach high enough to do well in a 2 OR 3 way setup. And its 4 ohm, which is a bit harder to find in home theater speakers. I went ahead and found what i think to be a good tweeter match too. I would put a HPF on the tweeter at around 4.5-5k if the included crossover gives too strong of a midrange.
8\" speaker/sub http://www.parts-express.com/pe/showdetl.c...tnumber=299-098 Just put a set of these tweeters on the same wires and be done with it http://cgi.ebay.com/JBL-P26T-POWER-SERIES-...#ht_1691wt_1059 This post has been edited by DGolden32: Mar 16, 2011 - 1:10 PM |
Mar 13, 2011 - 10:02 PM |
|
Enthusiast Joined Apr 28, '09 From Auburn, AL Currently Offline Reputation: 0 (0%) |
Sorry i just realized those links for the speakers somehow are broken!
lets try this again... if it doesn't work, just go to PartsExpress.com and search "8" Neodymium 4 ohm". Tweeter model is JBL P26T 8" sub/midrange http://www.parts-express.com/pe/showdetl.c...tnumber=299-098 Forget the crossover bullcrap, just throw a set of these jbl power series tweeters/crossovers for $58 on em. no assembly required http://cgi.ebay.com/JBL-P26T-POWER-SERIES-...#ht_1691wt_1059 |
Lo-Fi Version | Time is now: February 13th, 2025 - 6:07 AM |