 3sgte swap/ still no spark??, Have power going to coil on acc. ( both sides ) |
 Mar 26, 2011 - 9:44 AM
|
 
|
|
Enthusiast  Joined Jan 10, '11 From Trail BC Currently Offline Reputation: 1 (100%)  |
I have literally checked everything on this car, had engine harness redone for 3sgte st205, ( originally 5sfe ) coil checks out good, but have power going to coil when key turned on, as well as negative side of coil has constant power, is this right???? Is something screwed up in the wiring? As well, checked an injector clip, and have constant power to black/ orange wire, but nothing on the other...when trying to crank, could my coil check out good from a multimeter, and still be shot or something? Have no spark coming from coil, to coil wire,
 really driving me nuts right now. I'm plugin, but I'm not playin.
|
 |
Replies
|
Mar 26, 2011 - 12:01 PM
|
|
 Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
the fuel circuit and intercooler pump circuit run really close especially where the plugs for the relays are, and is easy to mess something up on the fuel pump relay while working with the pump relay. make sure is not a fuel issue you are having rather than ignition This post has been edited by Culpable04: Mar 26, 2011 - 12:05 PM --------------------  |
|
Mar 26, 2011 - 2:09 PM
|
|
|
Enthusiast Joined Jan 10, '11 From Trail BC Currently Offline Reputation: 1 (100%) |
QUOTE (Culpable04 @ Mar 26, 2011 - 12:01 PM)  the fuel circuit and intercooler pump circuit run really close especially where the plugs for the relays are, and is easy to mess something up on the fuel pump relay while working with the pump relay. make sure is not a fuel issue you are having rather than ignition Where do you suggest I look for this, in the engine bay driverside fuse box? |
Posts in this topic
injection 3sgte swap/ still no spark?? Mar 26, 2011 - 9:44 AM
presure2 silly question, but the ignitor is making good gro... Mar 26, 2011 - 9:52 AM
injection QUOTE (presure2 @ Mar 26, 2011 - 9:5... Mar 26, 2011 - 10:58 AM presure2 QUOTE (injection @ Mar 26, 2011 - 11... Mar 26, 2011 - 11:08 AM injection QUOTE (presure2 @ Mar 26, 2011 - 11... Mar 26, 2011 - 11:46 AM presure2 nope, the car will run without the pump being wire... Mar 26, 2011 - 11:59 AM injection QUOTE (presure2 @ Mar 26, 2011 - 12... Mar 26, 2011 - 12:23 PM Culpable04 that will depend on how they converted your harnes... Mar 26, 2011 - 2:45 PM brenton1919 QUOTE (injection @ Mar 26, 2011 - 10... Mar 26, 2011 - 3:50 PM presure2 Iirc he had the harness done by tweak. Mar 26, 2011 - 4:31 PM injection QUOTE (presure2 @ Mar 26, 2011 - 5:3... Mar 26, 2011 - 5:11 PM Neon90424 My 205 had problems with the relays I would lose s... Mar 26, 2011 - 11:55 PM injection QUOTE (injection @ Mar 26, 2011 - 9... Mar 27, 2011 - 12:18 AM injection If the fuel resister shorts out, could that cause ... Mar 27, 2011 - 10:58 AM Stambo i'm pretty sure if the resistor went out you w... Mar 27, 2011 - 11:50 AM injection QUOTE (Stambo @ Mar 27, 2011 - 11:50... Mar 27, 2011 - 12:07 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 1... Mar 27, 2011 - 2:24 PM injection QUOTE (brenton1919 @ Mar 27, 2011 - 2... Mar 27, 2011 - 2:52 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 2... Mar 27, 2011 - 3:21 PM brenton1919 QUOTE (Stambo @ Mar 27, 2011 - 12:50... Mar 27, 2011 - 2:29 PM Culpable04 are you saying you don't have pulse signal to ... Mar 27, 2011 - 3:36 PM injection QUOTE (Culpable04 @ Mar 27, 2011 - 4... Mar 27, 2011 - 4:10 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 5... Mar 27, 2011 - 4:18 PM presure2 3rd gens do not have a cam sensor..(well, technica... Mar 27, 2011 - 4:02 PM Culpable04 QUOTE (injection @ Mar 27, 2011 - 5... Mar 27, 2011 - 4:43 PM injection QUOTE (Culpable04 @ Mar 27, 2011 - 4... Mar 27, 2011 - 5:11 PM Stambo so looks like either something with the ecu or diz... Mar 27, 2011 - 5:36 PM brenton1919 QUOTE (Stambo @ Mar 27, 2011 - 5:36 ... Mar 27, 2011 - 5:38 PM injection QUOTE (Stambo @ Mar 27, 2011 - 6:36 ... Mar 27, 2011 - 5:59 PM injection QUOTE (injection @ Mar 27, 2011 - 6... Mar 27, 2011 - 6:12 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 6... Mar 27, 2011 - 6:22 PM injection QUOTE (brenton1919 @ Mar 27, 2011 - 6... Mar 27, 2011 - 6:32 PM presure2 QUOTE (injection @ Mar 27, 2011 - 7... Mar 27, 2011 - 6:55 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 7... Mar 27, 2011 - 9:27 PM injection Now that you said that Brenton, I did mount a wire... Mar 27, 2011 - 10:10 PM injection QUOTE (injection @ Mar 27, 2011 - 10... Mar 27, 2011 - 10:57 PM brenton1919 QUOTE (injection @ Mar 27, 2011 - 11... Mar 27, 2011 - 11:38 PM injection QUOTE (brenton1919 @ Mar 27, 2011 - 11... Mar 27, 2011 - 11:52 PM injection QUOTE (injection @ Mar 28, 2011 - 12... Mar 28, 2011 - 12:07 AM injection QUOTE (injection @ Mar 28, 2011 - 1... Mar 28, 2011 - 1:44 AM brenton1919 QUOTE (injection @ Mar 28, 2011 - 2... Mar 28, 2011 - 9:03 AM injection QUOTE (brenton1919 @ Mar 28, 2011 - 9... Mar 28, 2011 - 11:04 AM brenton1919 QUOTE (injection @ Mar 28, 2011 - 11... Mar 28, 2011 - 11:10 AM brenton1919 QUOTE (brenton1919 @ Mar 28, 2011 - 12... Mar 28, 2011 - 1:47 PM injection Well,'just finished installing new coil.....tr... Mar 28, 2011 - 1:40 PM |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 2:38 AM |