3sgte swap/ still no spark??, Have power going to coil on acc. ( both sides ) Options

[injection]

I have literally checked everything on this car, had engine harness redone for 3sgte st205, ( originally 5sfe ) coil checks out good, but have power going to coil when key turned on, as well as negative side of coil has constant power, is this right???? Is something screwed up in the wiring? As well, checked an injector clip, and have constant power to black/ orange wire, but nothing on the other...when trying to crank, could my coil check out good from a multimeter, and still be shot or something? Have no spark coming from coil, to coil wire, really driving me nuts right now. I'm plugin, but I'm not playin.

[presure2]

Iirc he had the harness done by tweak.

[injection]

Iirc he had the harness done by tweak.

Ok Pressure, here it goes, what do you think of this, pick-up coil, the clip that goes to distributer, R, Y, B, L, colored wires right, traced wires back to C4, C5, C17, C18, are the pinouts for the ECU clip C......Well, red, black, and yellow are correct, but the solid blue wire from distributer, turns into a blue with a thick black stripe at ECU pin.....there is a solid blue wire in this clip, but it's going to C 21 or 22 ( can't remember ) will have to see when I'm home. Point is maybe these two wires need to be reversed?? Regardless, I will take loom out of ECU/firewall tonight. And test distributer wires to ECU, make sure there is a path....