6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte swap/ still no spark??, Have power going to coil on acc. ( both sides )
post Mar 26, 2011 - 9:44 AM
+Quote Post
injection

Enthusiast
*
Joined Jan 10, '11
From Trail BC
Currently Offline

Reputation: 1 (100%)




I have literally checked everything on this car, had engine harness redone for 3sgte st205, ( originally 5sfe ) coil checks out good, but have power going to coil when key turned on, as well as negative side of coil has constant power, is this right???? Is something screwed up in the wiring? As well, checked an injector clip, and have constant power to black/ orange wire, but nothing on the other...when trying to crank, could my coil check out good from a multimeter, and still be shot or something? Have no spark coming from coil, to coil wire, confused.gif really driving me nuts right now. I'm plugin, but I'm not playin.
 
Start new topic
Replies
post Mar 27, 2011 - 10:10 PM
+Quote Post
injection

Enthusiast
*
Joined Jan 10, '11
From Trail BC
Currently Offline

Reputation: 1 (100%)




Now that you said that Brenton, I did mount a wire behind the intake manifold, on a 10mm bolt the wire had an end that excepted that bolt, n screwed it tight to back of manifold. From the harness
post Mar 27, 2011 - 10:57 PM
+Quote Post
injection

Enthusiast
*
Joined Jan 10, '11
From Trail BC
Currently Offline

Reputation: 1 (100%)




QUOTE (injection @ Mar 27, 2011 - 10:10 PM) *
Now that you said that Brenton, I did mount a wire behind the intake manifold, on a 10mm bolt the wire had an end that excepted that bolt, n screwed it tight to back of manifold. From the harness


Ok just tested coil with battery + - and had a very very small spark on coil wire ( discharge ) end, to screwdriver, is this spark supposed to be big n bold, or barely able to see it????? Cause that's what it was...really had to look for the spark????
post Mar 27, 2011 - 11:38 PM
+Quote Post
brenton1919

Enthusiast
**
Joined Feb 28, '11
Currently Offline

Reputation: 5 (100%)




QUOTE (injection @ Mar 27, 2011 - 11:57 PM) *
QUOTE (injection @ Mar 27, 2011 - 10:10 PM) *
Now that you said that Brenton, I did mount a wire behind the intake manifold, on a 10mm bolt the wire had an end that excepted that bolt, n screwed it tight to back of manifold. From the harness


Ok just tested coil with battery + - and had a very very small spark on coil wire ( discharge ) end, to screwdriver, is this spark supposed to be big n bold, or barely able to see it????? Cause that's what it was...really had to look for the spark????
yeah try to go get a new coil and see what it does i really think that is your problem
post Mar 27, 2011 - 11:52 PM
+Quote Post
injection

Enthusiast
*
Joined Jan 10, '11
From Trail BC
Currently Offline

Reputation: 1 (100%)




QUOTE (brenton1919 @ Mar 27, 2011 - 11:38 PM) *
QUOTE (injection @ Mar 27, 2011 - 11:57 PM) *
QUOTE (injection @ Mar 27, 2011 - 10:10 PM) *
Now that you said that Brenton, I did mount a wire behind the intake manifold, on a 10mm bolt the wire had an end that excepted that bolt, n screwed it tight to back of manifold. From the harness


Ok just tested coil with battery + - and had a very very small spark on coil wire ( discharge ) end, to screwdriver, is this spark supposed to be big n bold, or barely able to see it????? Cause that's what it was...really had to look for the spark????
yeah try to go get a new coil and see what it does i really think that is your problem


K man, I am gettin one tomorrow.....keep my fingers crossed, the scary thing is, if this doesn't work, I don't know what else it could be????
post Mar 28, 2011 - 12:07 AM
+Quote Post
injection

Enthusiast
*
Joined Jan 10, '11
From Trail BC
Currently Offline

Reputation: 1 (100%)




QUOTE (injection @ Mar 28, 2011 - 12:52 AM) *
QUOTE (brenton1919 @ Mar 27, 2011 - 11:38 PM) *
QUOTE (injection @ Mar 27, 2011 - 11:57 PM) *
QUOTE (injection @ Mar 27, 2011 - 10:10 PM) *
Now that you said that Brenton, I did mount a wire behind the intake manifold, on a 10mm bolt the wire had an end that excepted that bolt, n screwed it tight to back of manifold. From the harness


Ok just tested coil with battery + - and had a very very small spark on coil wire ( discharge ) end, to screwdriver, is this spark supposed to be big n bold, or barely able to see it????? Cause that's what it was...really had to look for the spark????
yeah try to go get a new coil and see what it does i really think that is your problem


K man, I am gettin one tomorrow.....keep my fingers crossed, the scary thing is, if this doesn't work, I don't know what else it could be????


Just checked power to ECU, and it lights up like a Christmas tree...definitely power to ECU. tongue.gif

Posts in this topic
- injection   3sgte swap/ still no spark??   Mar 26, 2011 - 9:44 AM
- - presure2   silly question, but the ignitor is making good gro...   Mar 26, 2011 - 9:52 AM
|- - injection   QUOTE (presure2 @ Mar 26, 2011 - 9:5...   Mar 26, 2011 - 10:58 AM
|- - presure2   QUOTE (injection @ Mar 26, 2011 - 11...   Mar 26, 2011 - 11:08 AM
|- - injection   QUOTE (presure2 @ Mar 26, 2011 - 11...   Mar 26, 2011 - 11:46 AM
- - presure2   nope, the car will run without the pump being wire...   Mar 26, 2011 - 11:59 AM
|- - injection   QUOTE (presure2 @ Mar 26, 2011 - 12...   Mar 26, 2011 - 12:23 PM
- - Culpable04   the fuel circuit and intercooler pump circuit run ...   Mar 26, 2011 - 12:01 PM
|- - injection   QUOTE (Culpable04 @ Mar 26, 2011 - 12...   Mar 26, 2011 - 2:09 PM
- - Culpable04   that will depend on how they converted your harnes...   Mar 26, 2011 - 2:45 PM
- - brenton1919   QUOTE (injection @ Mar 26, 2011 - 10...   Mar 26, 2011 - 3:50 PM
- - presure2   Iirc he had the harness done by tweak.   Mar 26, 2011 - 4:31 PM
|- - injection   QUOTE (presure2 @ Mar 26, 2011 - 5:3...   Mar 26, 2011 - 5:11 PM
- - Neon90424   My 205 had problems with the relays I would lose s...   Mar 26, 2011 - 11:55 PM
- - injection   QUOTE (injection @ Mar 26, 2011 - 9...   Mar 27, 2011 - 12:18 AM
- - injection   If the fuel resister shorts out, could that cause ...   Mar 27, 2011 - 10:58 AM
- - Stambo   i'm pretty sure if the resistor went out you w...   Mar 27, 2011 - 11:50 AM
|- - injection   QUOTE (Stambo @ Mar 27, 2011 - 11:50...   Mar 27, 2011 - 12:07 PM
||- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 1...   Mar 27, 2011 - 2:24 PM
||- - injection   QUOTE (brenton1919 @ Mar 27, 2011 - 2...   Mar 27, 2011 - 2:52 PM
||- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 2...   Mar 27, 2011 - 3:21 PM
|- - brenton1919   QUOTE (Stambo @ Mar 27, 2011 - 12:50...   Mar 27, 2011 - 2:29 PM
- - Culpable04   are you saying you don't have pulse signal to ...   Mar 27, 2011 - 3:36 PM
|- - injection   QUOTE (Culpable04 @ Mar 27, 2011 - 4...   Mar 27, 2011 - 4:10 PM
|- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 5...   Mar 27, 2011 - 4:18 PM
- - presure2   3rd gens do not have a cam sensor..(well, technica...   Mar 27, 2011 - 4:02 PM
- - Culpable04   QUOTE (injection @ Mar 27, 2011 - 5...   Mar 27, 2011 - 4:43 PM
|- - injection   QUOTE (Culpable04 @ Mar 27, 2011 - 4...   Mar 27, 2011 - 5:11 PM
- - Stambo   so looks like either something with the ecu or diz...   Mar 27, 2011 - 5:36 PM
|- - brenton1919   QUOTE (Stambo @ Mar 27, 2011 - 5:36 ...   Mar 27, 2011 - 5:38 PM
|- - injection   QUOTE (Stambo @ Mar 27, 2011 - 6:36 ...   Mar 27, 2011 - 5:59 PM
|- - injection   QUOTE (injection @ Mar 27, 2011 - 6...   Mar 27, 2011 - 6:12 PM
|- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 6...   Mar 27, 2011 - 6:22 PM
|- - injection   QUOTE (brenton1919 @ Mar 27, 2011 - 6...   Mar 27, 2011 - 6:32 PM
|- - presure2   QUOTE (injection @ Mar 27, 2011 - 7...   Mar 27, 2011 - 6:55 PM
|- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 7...   Mar 27, 2011 - 9:27 PM
- - injection   Now that you said that Brenton, I did mount a wire...   Mar 27, 2011 - 10:10 PM
|- - injection   QUOTE (injection @ Mar 27, 2011 - 10...   Mar 27, 2011 - 10:57 PM
|- - brenton1919   QUOTE (injection @ Mar 27, 2011 - 11...   Mar 27, 2011 - 11:38 PM
|- - injection   QUOTE (brenton1919 @ Mar 27, 2011 - 11...   Mar 27, 2011 - 11:52 PM
|- - injection   QUOTE (injection @ Mar 28, 2011 - 12...   Mar 28, 2011 - 12:07 AM
|- - injection   QUOTE (injection @ Mar 28, 2011 - 1...   Mar 28, 2011 - 1:44 AM
|- - brenton1919   QUOTE (injection @ Mar 28, 2011 - 2...   Mar 28, 2011 - 9:03 AM
|- - injection   QUOTE (brenton1919 @ Mar 28, 2011 - 9...   Mar 28, 2011 - 11:04 AM
|- - brenton1919   QUOTE (injection @ Mar 28, 2011 - 11...   Mar 28, 2011 - 11:10 AM
|- - brenton1919   QUOTE (brenton1919 @ Mar 28, 2011 - 12...   Mar 28, 2011 - 1:47 PM
- - injection   Well,'just finished installing new coil.....tr...   Mar 28, 2011 - 1:40 PM


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 2:54 AM