ABS light is on, tried pulling the abs code, NEED HELP PLEASE! Options

[barterj]

i fallowed a how to i found telling me to bridge the Tc and E1 ports and do the same thing as reading and engine code except its off the abs light. This is what happens.
When i turn the key the abs is illuminated, it goes out for second and then comes back on and stays on, its doesn't repeat. So i read something that says if the abs light stays on it could be a faulty abs computer. I went to the scrap yard and found 2 more and tried them both and the same thing happened. I can't imagine that both abs computers i tried were both faulty as well as mine. the chances of that i assume would be one in a million. any help would be appreciated.

This post has been edited by barterj: Jul 15, 2010 - 6:14 PM

[opie_7afe]

supercool right between drivers side firewall and strut tower small rectangle black box with diagnostics on the lid, and heres the place i use for some helpfull diagnostic information http://bgbonline.celicatech.com/6g/ and also im getting codes 32,34,35,36 should i just replace all sensors or what?. never had abs issues before and the diagnostic manual i have helps but not fully....or could it be just corrosion on the speed sensor plugs as this was a NY car in the past from what i found....thanks alot guys!


PS i didnt wanna make a new thread to help not clutter up forum with same questions that yall have heard before!

This post has been edited by opie_7afe: Apr 1, 2011 - 3:20 PM