ABS light is on, tried pulling the abs code, NEED HELP PLEASE! Options

[barterj]

i fallowed a how to i found telling me to bridge the Tc and E1 ports and do the same thing as reading and engine code except its off the abs light. This is what happens.
When i turn the key the abs is illuminated, it goes out for second and then comes back on and stays on, its doesn't repeat. So i read something that says if the abs light stays on it could be a faulty abs computer. I went to the scrap yard and found 2 more and tried them both and the same thing happened. I can't imagine that both abs computers i tried were both faulty as well as mine. the chances of that i assume would be one in a million. any help would be appreciated.

This post has been edited by barterj: Jul 15, 2010 - 6:14 PM

[Spider77]

You may have braking problems, but when is the last time you had to slam your brakes? Did they lock up or did you get that ABS vibration? Common points, ABS ECU, ABS Sol Relay, ABS MTR Relay, ABS Actuator.........if you look at some of my gripes, we have no schematic, so its hard to tell what happens and where (as far as electric flow is concerned). Corrosion might be a factor, hell, maybe all the sensors are not connected firmly?