 no start after swap |
 Apr 5, 2011 - 12:29 PM
|
 
|
|
Enthusiast  Joined Mar 1, '11 From Morgantown, WV Currently Offline Reputation: 0 (0%)  |
I swaped 7AFE in my 94 celica ST. Now the only way to start is to spray some throttle body cleaner in intake and it starts right up. I changed the fuel filter, verified there is spark when cranking and fuel injectors fire. Changed out the temperature sensor. Double checked all wiring and vacuume lines.
One thing is noticed is once the engine is running, the rpm will flicker if I turn the headlights on. Also If I put the car in drive, it shuts down. It will run in reverse though. Any idea? thanks. |
 |
Replies
|
Apr 5, 2011 - 9:11 PM
|
|
|
Enthusiast Joined Mar 1, '11 From Morgantown, WV Currently Offline Reputation: 0 (0%) |
I ended up replacing the fuel pressure regular only since the rail looks exactly the same and I got too lazy lol. Looks like you have to take out the throttle body and top cover of intake to get the fuel rail out. Well that did not work. I took off the distributor cap and there is a notch on the distributor rotor at the contact point. It looks damaged. I will change it out tomorrow and see what it does.
This post has been edited by wvuguy: Apr 5, 2011 - 9:12 PM |
|
Apr 6, 2011 - 7:51 AM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
QUOTE (wvuguy @ Apr 5, 2011 - 10:11 PM)  I ended up replacing the fuel pressure regular only since the rail looks exactly the same and I got too lazy lol. Looks like you have to take out the throttle body and top cover of intake to get the fuel rail out. Well that did not work. I took off the distributor cap and there is a notch on the distributor rotor at the contact point. It looks damaged. I will change it out tomorrow and see what it does. Hmm, timing was where I was going to with it next if it wasn't something on the manifold. |
Posts in this topic
wvuguy no start after swap Apr 5, 2011 - 12:29 PM
stwin2 check ur fuel pump and the injector gaskets Apr 5, 2011 - 3:23 PM rave2n What all did you swap?
Block,Head, accessories, s... Apr 5, 2011 - 3:56 PM wvuguy Fuel pump was running fine 15 days back with the o... Apr 5, 2011 - 3:57 PM wvuguy The new engine came with the intake manifold (incl... Apr 5, 2011 - 4:02 PM rave2n Should be fine with EGR delete, atleast mine was w... Apr 5, 2011 - 4:04 PM wvuguy The new engine came only came with intake manifold... Apr 5, 2011 - 4:09 PM rave2n Ugh, might need a expert to help ya then~!
Di... Apr 5, 2011 - 4:09 PM
wvuguy QUOTE (rave2n @ Apr 5, 2011 - 5:09 P... Apr 5, 2011 - 5:25 PM wvuguy Not yet but thats a good idea. I am going to try t... Apr 5, 2011 - 4:13 PM rave2n QUOTE (wvuguy @ Apr 5, 2011 - 4:13 P... Apr 5, 2011 - 4:15 PM wvuguy I have checked the timing over and over again. As ... Apr 6, 2011 - 8:03 AM rave2n I never completely bypassed the EGR in sense of no... Apr 6, 2011 - 10:13 AM wvuguy Thanks rave2n. I am gonna do that once I swap the ... Apr 6, 2011 - 1:23 PM rave2n QUOTE (wvuguy @ Apr 6, 2011 - 2:23 P... Apr 6, 2011 - 4:23 PM wvuguy I have disconnected the battery a few times so I w... Apr 6, 2011 - 7:59 PM rave2n You really gota change out to your original manifo... Apr 7, 2011 - 10:37 AM wvuguy I changed out the throttle body today which has al... Apr 7, 2011 - 12:22 PM rave2n Cool, no problem.
Double check the injectors seat... Apr 7, 2011 - 12:28 PM wvuguy I rented the fuel pressure testing kit from autozo... Apr 8, 2011 - 9:52 AM wvuguy Found some time to take the intake out. While at i... Apr 8, 2011 - 1:30 PM wvuguy Fixed! Had to take the starter out to tighten ... Apr 8, 2011 - 8:11 PM rave2n Combo of both in my opinion.
I don't think a ... Apr 8, 2011 - 10:51 PM wvuguy lol thats awesome. Learn some thing every day. Apr 8, 2011 - 10:54 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 1:30 PM |