 Garrett turbo, standard st205 ecu?, GT2860RS has arrived. |
 Apr 7, 2011 - 2:33 AM
|
 
|
 Enthusiast  Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%)  |
It's looking more and more like I've blown another CT turbo, and I've had enough
So I have some coin to spend on a new turbo, but not enough for an ECU (cost more than the turbo). What can I run with basic fuel mods? GT2860 - Should be a close match to an upgraded CT20b, Shouldn't have to worry about dangerous leaning? GT2871 - Direct replacement for GT2860, Flows more air than my fuel system can provide, but a good investment for later on when I can afford the ECU GT2876 - We're already talking high power turbos, why not go straight to the best compressor in the T28 series? I definitely want Ball Bearing, and I need to run safe boost on stock ECU (for now) Suggestions? This post has been edited by delusionz: Apr 20, 2011 - 11:21 PM -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
 |
Replies
|
Apr 15, 2011 - 2:23 AM
|
|
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
how long did you run until you got the haltech? could you floor it or did you have to nurse it everywhere? was it ok?
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Apr 15, 2011 - 5:31 AM
|
|
 Enthusiast Joined Mar 3, '08 From New Zealand Currently Offline Reputation: 1 (100%) |
QUOTE (delusionz @ Apr 15, 2011 - 2:23 AM)  how long did you run until you got the haltech? could you floor it or did you have to nurse it everywhere? was it ok? I think it was like two or three months before Haltech but ran fine boosted well but wanted to go further now look where we are lol QUOTE (korban @ Apr 15, 2011 - 5:28 AM) QUOTE (TRDGT4 @ Apr 15, 2011 - 1:17 AM) never run the Garrett on a stock engine but my standard setup was running about 16psi but then once I forged the bottom and fitted the Garrett it ran 14psi until I got the Haltech which saw 18 and then 20psi. What headgasket and studs are you using now? and was that 14psi just spring pressure or did you use an standalone boost controller before the haltech? Standard Genuine Toyota Headgasket and New Genuine Toyota Head bolts was running a Turbosmart Boost tee --------------------  _______________May COTM 2011_______________ |
Posts in this topic
delusionz Garrett turbo, standard st205 ecu? Apr 7, 2011 - 2:33 AM
malpaso Very possible... my first plan exactly was OEM ECU... Apr 7, 2011 - 2:56 AM 3WayStunna On the stock ECU im sure you could get away with a... Apr 7, 2011 - 8:34 AM delusionz I'm looking to play stock,400WHP sounds nice b... Apr 9, 2011 - 4:04 AM TRDGT4 well I ran my GT30R on stock ecu but my botttom en... Apr 9, 2011 - 5:09 PM delusionz That's good to know. In accordance with this a... Apr 11, 2011 - 11:04 PM
korban QUOTE (delusionz @ Apr 12, 2011 - 12... Apr 14, 2011 - 5:56 PM TRDGT4 QUOTE (korban @ Apr 14, 2011 - 6:56 ... Apr 15, 2011 - 1:17 AM delusionz Good things aren't cheap when it comes to turb... Apr 14, 2011 - 6:39 PM korban QUOTE (delusionz @ Apr 14, 2011 - 7... Apr 14, 2011 - 6:50 PM delusionz Keeping the stock W2A top mount, the IC inlet is g... Apr 14, 2011 - 11:44 PM korban QUOTE (TRDGT4 @ Apr 15, 2011 - 1:17 ... Apr 15, 2011 - 5:28 AM delusionz Sweeet, I'm sure 14psi on this beast is gonna ... Apr 15, 2011 - 7:02 AM TRDGT4 QUOTE (delusionz @ Apr 15, 2011 - 8... Apr 15, 2011 - 3:28 PM korban QUOTE (delusionz @ Apr 15, 2011 - 7... Apr 18, 2011 - 11:01 PM delusionz Actually changed my mind, after several discussion... Apr 18, 2011 - 11:37 PM delusionz Just received the GT2860RS. It is patheticly small... Apr 20, 2011 - 11:32 PM delusionz http://www.youtube.com/watch?v=XoV8QKrP_Q4
Here... Apr 27, 2011 - 2:13 AM Culpable04 I actually saw that car yesterday, he lives near m... Apr 27, 2011 - 10:14 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 1:06 PM |