6G Celicas Forums

Welcome Guest ( Log In | Register )

> Bucking/hesitating, 2nd gen 3sgte
post Apr 14, 2011 - 9:05 PM
+Quote Post
Stambo



Enthusiast
****
Joined Apr 23, '08
From Muskego,Wi
Currently Offline

Reputation: 8 (100%)




I've been cruising around on mr2oc and looking through pages of people having the same problem but never finding a answer to the problem.

It doesn't matter if the engine is hot or cold just driving normally I will experience a hesitation or bucking sensation when just going through the first couple gears.

I change the bkr7e nkg plugs often now. Just threw a new set in. New cap/rotor/wires last fall. Just put a new coil on. Checked timing and its at 10* just like it should be. Used the smoke machine at work and smoked the entire intake system and tightened up any clamps that needed to be tightened on the intercooler piping.

Anyone have any thoughts? Still does the same thing once in awhile.

Next step for me is going to take a lab scope and do a TP sweep and see if there are any bad spots in the tp sensor itself.

This post has been edited by Stambo: Aug 24, 2011 - 11:23 PM


--------------------
2nd Gen 3s-gte.... It lives!

97celiman
"92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM"
 
Start new topic
Replies
post Apr 15, 2011 - 9:11 AM
+Quote Post
Stambo



Enthusiast
****
Joined Apr 23, '08
From Muskego,Wi
Currently Offline

Reputation: 8 (100%)




Good point. Do you know if one tooth off is 10*? I wonder if i set my base timing to 0 that would make a difference just to confirm that the mechanical timing is off.....


--------------------
2nd Gen 3s-gte.... It lives!

97celiman
"92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM"

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 10:00 AM