3SGE Beams powered Celica, Her replacement has arrived Options

[S8S8]

I've had my Celica since 2005. It's a ZR model which was released in Australia with the 5SFE engine. The ZR came with a few nice little extras like the leather wheel and gear knob, airbag, ABS, cruise control etc. I wish it had the sunroof, but unfortunately the original owner was too tight to tick the option box!

My current plans are to build a car that I can enjoy on the weekends and take out to the occasional track day. I used to have an AE86 JDM Levin that I took to the track, so I'd really love to get back into that.

I toyed with the idea of selling it and buying a later model WRX or EVO, but I reckon for less than $10,000 I can build a car that might not be a rocket ship, but will definitely be good fun.

I'm not really into the visual side of things, so most of the work will be around making the car more fun and enjoyable to drive.

Current mods:

• 18" wheels
• Lowered springs

Planned mods:

• 3SGE Beams conversion (done)
• SS-II twin piston brakes (done)
• SS-II instrument cluster (done)
• SS-II leather steering wheel (done)
• JDM auto climate control (done)
• GT4 front end (done - but needs paint)
• GT4 rear strut brace (done)
• JDM tails (done)
• JDM projectors (done)
• Bigger exhaust to suit the Beams (done)
• BC Racing coilovers (done)
• Sportier front seats

Here's a couple of pics back when the wheels were new:









Looking forward to starting the Beams conversion and I'll probably be asking plenty of questions on here!

Cheers
Shane.

This post has been edited by S8S8: Jan 19, 2017 - 6:46 PM

[S8S8]

After a few weeks away I made some really good progress over the weekend.

The old engine is out of my car, and I can't tell you how happy I am to see that dirty old Camry engine out. It should never have been in a Celica to start with!

Here's the state of my garage earlier this weekend, with my one and a half Celicas.



I've finished most of the maintenance on the Beams, with the timing belt, water pump and thermostat done. The new clutch kit is almost ready to go, but I just have to get the flywheel machined first.

Once I get the flywheel done and order a new TPS (which I broke earlier in the process) I should be on the home straight and ready to get the Beams into its new home.

Should be on the road next weekend, fingers crossed!