![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
New: Do I need ALL the GT mounts to swap into an ST? Or tell me which ones I will need
Will be using the GT transmission. I can get the cables, but are the shifters the same? or do I need one from a GT? thanks Thanks just need to know what to buy Ok so I bought Jims alltrac 3sgte, that manny installed, and did all the work to (timing belt, seals, ect.) so all thats already done for me (yeah i got super lucky ![]() It comes with an ACT 6 puck clutch installed. I was debating on the e153 trans, but have decided to go with the stock GT trans, just to get it done sooner. maybe Ill go that route later. This post has been edited by mgnt232: May 13, 2011 - 7:02 PM -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) ![]() |
you need a 3S pressure plate with a 5S disk. Southbend clutch can also make you a 3S clutch set with the 5S-FE splines in the hub of the disk. all you have to do to install is follow the 3S-GTE in an ST guide. you need to drill and tap the holes in the frame to support the engine mounts
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
![]() ![]() |
Lo-Fi Version | Time is now: February 25th, 2025 - 3:34 AM |