New Wheel Package, help!, Guru's! JON, KYLE, HAROLD this means you! |
New Wheel Package, help!, Guru's! JON, KYLE, HAROLD this means you! |
Apr 20, 2011 - 2:21 PM |
|
Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
When I get my tax return back, I might be looking at a new set of rims.
I've had a local performance shop spec out a set I've had my eye on for some time, but now I need the pro's opinions. I think I want to stretch the rubber on these rims too, because I really dig that ultra-low profile look Here's what the performance shop came up with: ---- start quote ------ 2x Forged 5zigen FN01R 18X7.5 +35 - 328.00 each 2x Forged 5zigen FN01R 18X8.5 +35 - 362.00 each For the tires I would recommend the following. 215/35/18 Dunlop Direzza DZ101 – 181.42 each Kumho Ecsta SPT - $175.85 each Yokohama Prada Spec 2 - $209.25 each Yokohama S-Drive - $209.25 each Kumho AST - $138.27 each ----- end quote ----- Now, they only recommended one size of tire, and if you'll notice I was hoping to put the wider rims in the rear.... so that doesn't make any sense to me. But from your experience, what would be the tire size I should be looking for in order to get a good stretched look? And opinions on the rims? I wanted a strong forged 18" rim that would be lighter in weight than average, and I've always liked the look of the FN01R's. Will the offset I've ordered work properly...? I'm looking to get as hella flush as I can, and barely understand the camber, offset, and toe-in lingo, so please help in anyway you can. I should also mention that I've purchased Tanabe Sustec Pro Type I coilovers and ST Sway Bars w/ twos endlinks that will be going on before the rims arrive, so I want to ensure that I don't "rub" too much. I'm all for rolling fenders, but I need help ensuring that the specs are correct so that I have good fitment. Thanks guys! This post has been edited by KAOS: Apr 20, 2011 - 2:22 PM -------------------- |
Apr 20, 2011 - 3:47 PM |
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
what do you want 2 different widths? Is that the lowest offset FN's you can get?
I wouldnt stretch Paradas, Direzzas suck, Ecstas uhhh......... I would do Federal 595's if you wanna stretch a little. 8-9 wide: 215/40 or 205/40 depending how much you wanna stretch 7-8 wide: 205/40 or 195/40 my 18s are +30 with spacers: +5 front 0 rear 215/35 in front 225/35 rear moved my 215/35 to the rear to clear a little more w/camber bolts maxed and then some -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
Apr 21, 2011 - 8:51 AM |
|
Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
what do you want 2 different widths? Is that the lowest offset FN's you can get? I wouldnt stretch Paradas, Direzzas suck, Ecstas uhhh......... I would do Federal 595's if you wanna stretch a little. 8-9 wide: 215/40 or 205/40 depending how much you wanna stretch 7-8 wide: 205/40 or 195/40 my 18s are +30 with spacers: +5 front 0 rear What offset should I shoot for when I order them then? I'll just stick with the 18x7.5's then... This post has been edited by KAOS: Apr 21, 2011 - 8:51 AM -------------------- |
Lo-Fi Version | Time is now: January 15th, 2025 - 1:39 PM |