 Beams is in - but won't start |
 Apr 23, 2011 - 5:54 PM
|
 
|
 Enthusiast  Joined May 9, '09 From Brisbane, Australia Currently Offline Reputation: 0 (0%)  |
I've just finished converting my Aussie ST204 to Beams power using an ST202 SS-II clip, but I can't get the engine to start.
The engine turns over, but won't fire. We're pretty sure the problem is the fuel pump, as there is no fuel pressure. The relay on the ECU is operating, so the issue seems to be somewhere between there and the fuel pump. It was working fine with my old 5SFE just last week, so I'm sure it must be a wiring issue rather than an issue with the pump itself. There are issues with wiring to the new instrument cluster too. It's way off, with all to wrong lights coming on for the indicators and high beam etc. The dash lights don't work at all either. I'm not so worried about the dash issue at this stage, but thought I'd mention it on the off chance it could be connected with the non-starting issue. Any assistance would be greatly appreciated. 
-------------------- |
 |
Replies
|
Apr 28, 2011 - 8:58 PM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
Guess you don't need that clutch-in start function then.
So those door wires that were all cut in the donor car, obviously when you connected your wiring to the donor fuse box (is that where they go?) There was a wiring mismatch as I suspected. So maybe disconnect that, and wire in each control one by one, do you have all the same functions as JDM? like the folding mirrors and the window lock on the drivers side and all that? -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Posts in this topic
S8S8 Beams is in - but won't start Apr 23, 2011 - 5:54 PM
Bitter so jump power to the fuel pump direct and see if i... Apr 23, 2011 - 7:00 PM S8S8 Tried that, still no luck. Apr 25, 2011 - 3:15 AM soulshadow Your wiring must be a mess. Check your wiring diag... Apr 25, 2011 - 10:28 AM
S8S8 QUOTE (soulshadow @ Apr 26, 2011 - 1... Apr 26, 2011 - 7:37 PM Rusty Check your wiring connections:
- make sure each wi... Apr 27, 2011 - 12:15 AM Batman722 so you used the engine harness and the front chass... Apr 27, 2011 - 7:28 AM S8S8 Thanks Rusty & Batman.
Everything is plugged ... Apr 27, 2011 - 4:43 PM njccmd2002 there is a wire you need to repin for that. was y... Apr 27, 2011 - 5:24 PM soulshadow Hows the COR relay Did you wire that up properly? ... Apr 27, 2011 - 6:27 PM S8S8 Things are going backwards now... the engine won... Apr 27, 2011 - 6:37 PM Batman722 ok.
you did no wiring changes except change the d... Apr 28, 2011 - 12:45 AM S8S8 I know you guys are far more experienced than me, ... Apr 28, 2011 - 2:29 AM delusionz You talking about something that prevents the star... Apr 28, 2011 - 2:57 AM delusionz Come to think of it, I've never had a 1998 mod... Apr 28, 2011 - 6:16 AM S8S8 If this was my daily driver I would have sent it t... Apr 28, 2011 - 8:17 PM S8S8 I fixed the short, so no more blown fuses or dash ... Apr 28, 2011 - 11:36 PM delusionz Awesome, Let us know what went wrong! Apr 29, 2011 - 2:18 AM S8S8 As I expected, the problem was incredibly minor - ... May 4, 2011 - 6:11 PM Bitter are all the grounds connected? Is the fuel pump ge... May 4, 2011 - 9:50 PM S8S8 QUOTE (Bitter @ May 5, 2011 - 12:50 ... May 4, 2011 - 10:06 PM Bitter Ah, I read it but I missed it. sorry.
So now, you... May 5, 2011 - 7:48 AM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 19th, 2025 - 11:35 PM |