6G Celicas Forums

Welcome Guest ( Log In | Register )

> 4AGE 20v wont idle right or go over 60mph!, I did a engin swap from a 7afe to 4age and it runs poor!
post Mar 30, 2011 - 11:00 PM
+Quote Post
trd_fun

Enthusiast

Joined Dec 29, '10
From san antonio
Currently Offline

Reputation: 0 (0%)




After doing the swap the car runs but it wont idle right. it idles at 800rpms and it wont go faster then 60mph.
I been trying to get this fixed right for 2 months now. I changed the ECU and i also changed the MAF thinking it would be these two things but it didnt work. When i put the new ECU in it ran right for like 4 or 5 days then it went back to the same problem. It feels like its holding back power and it smells like heavy gas fumes all the time.
Can any one help with some ideas to what it could be!??

Thanks guys.
 
Start new topic
Replies
post May 2, 2011 - 4:45 PM
+Quote Post
soulshadow



Enthusiast
*****
Joined Apr 18, '05
From Lincoln, Ar
Currently Offline

Reputation: 7 (100%)




I had that on 2 different ecus, it didn't seem to make any difference. Cold starts where the worst, I sit their and crank and crank for a good 2 mins b4 it fired up. Vvt works, but its the idle control valve that the ecu can't control. MOre than likely you wired up something that wasn't supposed to be hooked up. Switched to MS2, waiting to finsh the install after 2 years lol.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 10th, 2025 - 1:16 AM