wtb: shopping list, help me out!, need several parts to fix up a crying hatch! Options

[perkyshadow]

Hey guys! I recently got a hatchback that I'm trying to fix up. I need several parts to finish the job, and I'm just having a hard time of finding them all at dirt cheap prices! If you've got some of this stuff lying around, let me know, and I'll jump on it! Here's the list:

1. Shifter surround for a manual. (plastic part)
2. Drivers door switch thing. (if the tabs are good)
3. Fender liners and screws and clips.
4. Plastic under the bumper and engine with screws and clips.
5. Maybe cheap hatch taillights, too. (Really cheap, though)
6. Struts. (with the boots, mounts, and screws, dirt cheap, but working.) I'm replacing blown D2 coilovers and have some stock springs lying around!
7. Tweeter covers

I also need a cut of the passenger rear fender to fix a rust issue I've got on my ragtop. I'd rather get a cut from a fender and weld it on instead of just using bondo/fiberglass!

Thanks in advance for the help, guys!

Thanks guys! Keep it coming! Really appreciate it!

This post has been edited by perkyshadow: May 6, 2011 - 6:23 PM

[SupraKid]

Hey guys! I recently got a hatchback that I'm trying to fix up. I need several parts to finish the job, and I'm just having a hard time of finding them all at dirt cheap prices! If you've got some of this stuff lying around, let me know, and I'll jump on it! Here's the list:

1. Shifter surround for a manual. (plastic part) Should have
2. Drivers door switch thing. (if the tabs are good) May have
3. Fender liners and screws and clips. Have but shipping
4. Plastic under the bumper and engine with screws and clips. Have but shipping
5. Maybe cheap hatch taillights, too. (Really cheap, though) Have if you dont already
6. Struts. (with the boots, mounts, and screws, dirt cheap, but working.) I'm replacing blown D2 coilovers and have some stock springs lying around! Have blown ones (or a set of brand new kybs, but they will be expensive lol)
7. Tweeter covers have

I also need a cut of the passenger rear fender to fix a rust issue I've got on my ragtop. I'd rather get a cut from a fender and weld it on instead of just using bondo/fiberglass!

Thanks in advance for the help, guys!

Wow man im really sorry! I remember reading your email and setting it aside thinkin id do it later then forgot. I listed above what i have.

[perkyshadow]

Updated the list! Found some really great struts and fender liners at a junkyard a couple of hours away! Let me know if you guys get your hands on any of this other stuff! Thanks again, guys!