![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 1, '09 From Norway Currently Offline Reputation: 2 (100%) ![]() |
Its time to release the beast! My 3SGTE engien needs a bigger fuel pump.
I now have the Walbro 255 but im am maxing that one out. Im looking for the full potential off the engien i have and that should be around 441KW/600Horsepower. Anyone have any links to website or have any information on any pumps out there? Do i have to uppgade and use 2 pumps? Iv tried to find some information on the site but i could not find any. If there is a post in the forum allready pleas refer me to it. All info is appreciated ![]() Regards Rudi |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 1, '09 From Norway Currently Offline Reputation: 2 (100%) ![]() |
Czwalga do you have 2x walbro 255 pumps in your tank? And then made a T connection in the tank to deliver fuel in 1 line to the engien? or are they serial connected?
If i should buy a Aeromotive A1000 do i just disconnect the walbro pump and run the Aeromotive alone? 1 last question. The original fuel line in the ST205, Anyone know what they are good for? before you need to change or add 1 more line. |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 9:34 AM |