6G Celicas Forums

Welcome Guest ( Log In | Register )

> 7afe internals, replacement pistons?
post Jan 25, 2004 - 3:05 PM
+Quote Post
zipstrips

Enthusiast
***
Joined Sep 9, '02
From Scranton, Pa
Currently Offline

Reputation: 7 (100%)




ive looked and found that some 4a or 4agze pistons will work, or with modification.. well does anyone have 1st hand experience on which one fits and what special you need to do to make them work. i would rather buy these than pay for customs.
 
 Start new topic
Replies
post Jan 27, 2004 - 6:55 PM
+Quote Post
zipstrips

Enthusiast
***
Joined Sep 9, '02
From Scranton, Pa
Currently Offline

Reputation: 7 (100%)




QUOTE (doGGy @ Jan 26, 2004 - 6:39 AM)
I got GZE pistons for 120$ shipped from Ebay. Only difference detween 7A and gze pistons are that the wrist pins in GZE pistons is locked and the 7A is presured. Everything else is the same. So with little modification, you will have 8.9 instead of 9.5 compresion ratio. And as long as i know the 4A-GZE pistons are semi-forged, with ceramic coating on top.

And about arias pistons, check www.club4ag.com there is some guys selling them for somthing like 350$.

Good luck smile.gif

ok, so the gze pistons will work, i understand how to change the wrist pins but what to i have to do to the rod to make it work..sense its made not to float.

Posts in this topic
- zipstrips   7afe internals   Jan 25, 2004 - 3:05 PM
- - FallenHero   Ask Doggy. The GZE pistons are what you want. th...   Jan 25, 2004 - 9:38 PM
- - SpedToe169   If this is going to cost a lot, you can get custom...   Jan 25, 2004 - 9:45 PM
- - doGGy   I got GZE pistons for 120$ shipped from Ebay....   Jan 26, 2004 - 8:39 AM
- - zipstrips   QUOTE (doGGy @ Jan 26, 2004 - 6:39 AM) I got GZE p...   Jan 27, 2004 - 6:55 PM
- - FallenHero   if the block is scratched a bit,and needs to be bo...   Jan 27, 2004 - 11:43 PM
- - zipstrips   QUOTE (FallenHero @ Jan 27, 2004 - 9:43 PM) if the...   Jan 28, 2004 - 12:51 AM
- - doGGy   QUOTE (zipstrips @ Jan 27, 2004 - 10:51 PM) QUOTE ...   Jan 28, 2004 - 3:20 AM
- - zipstrips   doggy, make sure to let me know what happens.. rig...   Jan 28, 2004 - 7:38 AM
- - doGGy   QUOTE (zipstrips @ Jan 28, 2004 - 5:38 AM) doggy, ...   Jan 28, 2004 - 8:03 AM
- - SpedToe169   QUOTE So thats the problem is, that the Stock pins...   Jan 28, 2004 - 10:46 AM
- - FallenHero   Has anybody done this yet? Also, I think I read ...   Mar 11, 2004 - 11:52 PM
- - zipstrips   QUOTE (FallenHero @ Mar 11, 2004 - 9:52 PM) Has an...   Mar 12, 2004 - 7:24 PM
- - FallenHero   http://www.club4ag.com/faq%20and%20tech_pa...A-GZE...   Mar 13, 2004 - 12:36 AM
- - celicarocker   QUOTE (doGGy @ Jan 26, 2004 - 8:39 AM) you will ha...   Mar 13, 2004 - 1:01 AM
- - slipgun   make it better for boost   Mar 14, 2004 - 12:56 AM

« Next Oldest · Engine/Transmission/Maintenance · Next Newest »
 

Reply to this topicStart new topic
13 User(s) are reading this topic (13 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version Time is now: February 24th, 2025 - 10:27 PM
Powered By IP.Board © 2025  IPS, Inc.