 Removing JDM Flashers |
 May 18, 2011 - 7:44 PM
|
 
|
|
Enthusiast  Joined Dec 7, '10 Currently Offline Reputation: 1 (100%)  |
The car: http://i407.photobucket.com/albums/pp156/t...ea/P4290027.jpg
I want to remove the JDM flashers (orange light by the door) because I made mine USDM for inspection. I was wondering if I remove the JDM ones, the dash lights would act as the light was dead? (quicker tic-tacs) Or I have to counter it by connecting a resistor with the same Ohm...but I was told the car could get on fire if I did that... |
 |
Replies
|
May 26, 2011 - 8:01 AM
|
|
 Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
Im not sure about where you are, but in Winnipeg to pass an inspection all you need is to have reflectors on the side of the fender, and you don't have to actually remove the JDM signals, as long as you have an orange reflector on the front of the fender, and turns signals in the front.
I know people who have just temporarily put bike reflectors on there fenders to pass inspections and then taken them off once they had passed. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
|
May 26, 2011 - 5:12 PM
|
|
|
Enthusiast Joined Dec 7, '10 Currently Offline Reputation: 1 (100%) |
QUOTE (jordisonjr @ May 26, 2011 - 9:01 AM)  Im not sure about where you are, but in Winnipeg to pass an inspection all you need is to have reflectors on the side of the fender, and you don't have to actually remove the JDM signals, as long as you have an orange reflector on the front of the fender, and turns signals in the front. I know people who have just temporarily put bike reflectors on there fenders to pass inspections and then taken them off once they had passed. I know!!!!!!!!!!!!!!!!!!!!! this is what I have done...but I wantED to remove the JDM FLASHERRRRRRRRSSSSSSSSSS... I already did though and no it doesn't mess up the cluster signals after all |
|
May 26, 2011 - 9:35 PM
|
|
|
Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
QUOTE (TheChildOfTheSea @ May 26, 2011 - 6:12 PM) QUOTE (jordisonjr @ May 26, 2011 - 9:01 AM) Im not sure about where you are, but in Winnipeg to pass an inspection all you need is to have reflectors on the side of the fender, and you don't have to actually remove the JDM signals, as long as you have an orange reflector on the front of the fender, and turns signals in the front. I know people who have just temporarily put bike reflectors on there fenders to pass inspections and then taken them off once they had passed. I know!!!!!!!!!!!!!!!!!!!!! this is what I have done...but I wantED to remove the JDM FLASHERRRRRRRRSSSSSSSSSS... I already did though and no it doesn't mess up the cluster signals after all relax man, it didn't say anything in the OP about you knowing that, so I thought I would try and be a nice guy and save you some work. Next time Ill just keep my mouth shut.. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
|
May 27, 2011 - 11:42 AM
|
|
|
Enthusiast Joined Dec 7, '10 Currently Offline Reputation: 1 (100%) |
QUOTE (jordisonjr @ May 26, 2011 - 10:35 PM) QUOTE (TheChildOfTheSea @ May 26, 2011 - 6:12 PM) QUOTE (jordisonjr @ May 26, 2011 - 9:01 AM) Im not sure about where you are, but in Winnipeg to pass an inspection all you need is to have reflectors on the side of the fender, and you don't have to actually remove the JDM signals, as long as you have an orange reflector on the front of the fender, and turns signals in the front. I know people who have just temporarily put bike reflectors on there fenders to pass inspections and then taken them off once they had passed. I know!!!!!!!!!!!!!!!!!!!!! this is what I have done...but I wantED to remove the JDM FLASHERRRRRRRRSSSSSSSSSS... I already did though and no it doesn't mess up the cluster signals after all relax man, it didn't say anything in the OP about you knowing that, so I thought I would try and be a nice guy and save you some work. Next time Ill just keep my mouth shut.. nononono, don't take it that way! I was just fooling around  SO they're not flashers...I just have to pull and they'll come off? I already took the light out of one though Thanks for your answers 
|
Posts in this topic
TheChildOfTheSea Removing JDM Flashers May 18, 2011 - 7:44 PM
CoreyST how exactly does not having them make it not DOT? ... May 25, 2011 - 1:53 PM mkernz22 inspection places dont car if you have any lights ... May 25, 2011 - 2:29 PM
TheChildOfTheSea QUOTE (mkernz22 @ May 25, 2011 - 3:2... May 25, 2011 - 10:04 PM spolski07 THEY DONT FLASHHHHHHHHHHHHHHHHHHHHHH
they are jus... May 26, 2011 - 8:13 PM azian_advanced yeah just pull them out, but pull on the side clos... May 27, 2011 - 5:18 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 5:16 AM |