6G Celicas Forums

Welcome Guest ( Log In | Register )

> Upgraded Suspension Bushings, front control arm and rear trailing/adjustment arm bushings
post Jan 14, 2010 - 9:28 PM
+Quote Post
hurley97



Enthusiast
*****
Joined Mar 3, '04
From Portsmouth, RI
Currently Offline

Reputation: 33 (100%)




A while ago I bought these Polyurethane bushings for the rear suspension and I finally got a chance to install them




You can get them on eBay here
or from Red Rocket Performance, or user RedRkt01 here on 6gc, mr2oc, or celicatech


We had installed the set for the front on Dustin's car a while back, link to thread here, and they made a huge difference. I wanted to do the rears first in my car to see the difference between just the fronts and just the rears. So I did.

They replace the bushings in both rear adjustment arms, trailing arms, and control arms. I brought the car to work and installed them with the help of one of the guys I work with. The job required the use of the press, vice, air hammer, torch, the air gun, and a few hand tools. Not really a job I could have done by myself outside in front of the house, might have been able to do it in Manny's garage but it would not have been easy and would have taken at least all day if not all weekend. It took us about 3-1/2 to 4 hrs to finish the job. And yes, you really need to do an alignment afterward.

I didn't really take good pictures during the process and all I have are crappy pictures of the finished product. Maybe I can get some better ones on my day off.












First Impressions:
I've only put about 150 miles on the car since the installation and most of it has been back and forth to work in traffic. I do have to say, these things are very bad for me. People already tell me I drive like a maniac and I'm usually the only person on the road who speeds up to take a corner, but now I just feel like I can go even faster all the time. I have gotten a little time with some corners and all I can think about is finding more corners and driving even faster around them. I actually got my front wheels to loose grip around a corner while the rear had not problem and just guided the car around. The car feels much more solid overall and, it might seem weird, but I feel like the steering is more precise.
I used to take 30mph curved exit ramps at 75-80mph and be scared, hovering my foot over the brake pedal just in case I needed it. Now, I have complete confidence in my 80mph exit ramp and speed up the whole way through. So far so good biggrin.gif

(I really am not that much of a manic though... not all the time anyway)

This post has been edited by hurley97: May 31, 2011 - 5:25 PM


--------------------
7A-FTE: It's not about the money. Our Beams Swap.

I <3 Dustin---07/16/06
 
Start new topic
Replies
post Jun 1, 2011 - 10:11 AM
+Quote Post
Culpable04



Enthusiast
*****
Joined Apr 17, '06
From New Jersey
Currently Offline

Reputation: 105 (100%)




basically same price, I think he had some kind of 6gc discount, but not sure what percent, so I ordered mines from that site.
got them around 2 weeks later which considering they are coming from Poland is not bad at all.



--------------------

post Jun 1, 2011 - 10:18 AM
+Quote Post
purplegt4



Enthusiast
*****
Joined Feb 7, '03
From Northern Virginia
Currently Offline

Reputation: 23 (100%)




QUOTE (Culpable04 @ Jun 1, 2011 - 10:11 AM) *
basically same price, I think he had some kind of 6gc discount, but not sure what percent, so I ordered mines from that site.
got them around 2 weeks later which considering they are coming from Poland is not bad at all.


awesome.

the site said to contact about worldwide shipping, u remember how much that ran?

Posts in this topic
- hurley97   Upgraded Suspension Bushings   Jan 14, 2010 - 9:28 PM
- - epocsirhc   When will you be doing the front bushings? I think...   Jan 14, 2010 - 10:28 PM
- - SwissFerdi   So this basically gets rid of some play in the com...   Jan 14, 2010 - 10:59 PM
- - Tigawoods   looks great! the only reason that has kept me ...   Jan 14, 2010 - 11:08 PM
- - Stambo   you might as well do an alignment after getting al...   Jan 14, 2010 - 11:32 PM
|- - Galcobar   QUOTE (Stambo @ Jan 14, 2010 - 9:32 ...   Jan 17, 2010 - 7:30 AM
|- - hurley97   QUOTE (Galcobar @ Jan 17, 2010 - 7:3...   Jan 17, 2010 - 11:16 AM
- - blu94gt   Bushings are a PAIN IN THE BUTT to do! I did ...   Jan 14, 2010 - 11:58 PM
- - BonzaiCelica   oo very nice. Cant wait to get all my suspension w...   Jan 15, 2010 - 3:22 AM
- - Ruroniarc   http://cgi.ebay.co.uk/SUSPENSION-BUSHING-K...d#ht_...   Jan 15, 2010 - 11:24 AM
- - SwissFerdi   For a few pieces of material, $200? What a ri...   Jan 15, 2010 - 5:33 PM
|- - Batman722   QUOTE (SwissFerdi @ Jan 15, 2010 - 5...   Jan 15, 2010 - 5:48 PM
|- - SwissFerdi   QUOTE (Batman722 @ Jan 15, 2010 - 5...   Jan 15, 2010 - 8:14 PM
- - BonzaiCelica   you have to consider that he is the only person wh...   Jan 15, 2010 - 5:52 PM
- - hurley97   This is what I was quoted when I bought them, not ...   Jan 15, 2010 - 6:04 PM
|- - OOBE   QUOTE (hurley97 @ Jan 15, 2010 - 4:0...   Jan 16, 2010 - 1:33 AM
- - richee3   I'm sure if you have old crappy worn out bushi...   Jan 15, 2010 - 9:27 PM
- - hurley97   I have to comment that it was money well spent. An...   Jan 15, 2010 - 10:32 PM
|- - SwissFerdi   QUOTE (hurley97 @ Jan 15, 2010 - 10...   Jan 16, 2010 - 12:48 AM
- - Stambo   shot down, anyways when you get the fronts install...   Jan 15, 2010 - 11:14 PM
- - OOBE   I bought those Polish bushings for my Celica month...   Jan 16, 2010 - 1:30 AM
- - Tigawoods   i would have no problem forking that out   Jan 16, 2010 - 2:39 AM
|- - OOBE   QUOTE (Tigawoods @ Jan 16, 2010 - 1...   Jan 17, 2010 - 6:13 PM
- - Stambo   thanks for the info. Shouldn't be to bad excep...   Jan 17, 2010 - 3:58 PM
|- - hurley97   QUOTE (Stambo @ Jan 17, 2010 - 3:58 ...   Jan 17, 2010 - 10:46 PM
|- - IllIllIll   Did you notice an increase in noise from the suspe...   Jan 18, 2010 - 11:36 AM
- - domyz   I did front, rear bushings in polyurethane as well...   Jan 17, 2010 - 5:51 PM
- - Euphoria   QUOTE (hurley97 @ Jan 14, 2010 - 10...   Jan 17, 2010 - 8:10 PM
- - hurley97   Not at all. Just as quiet as before.   Jan 18, 2010 - 12:05 PM
- - RocketScott   Any chance on doing a group buy on these and the f...   Jan 18, 2010 - 12:10 PM
|- - stl95celica   QUOTE (RocketScott @ Jan 18, 2010 - 12...   Jan 25, 2010 - 12:15 AM
|- - ChfNix   QUOTE (stl95celica @ Jan 24, 2010 - 11...   Feb 2, 2010 - 2:29 PM
|- - str8thugginit4ya   QUOTE (ChfNix @ Feb 2, 2010 - 2:29 P...   Feb 15, 2010 - 4:36 PM
- - lburner   im in   Feb 5, 2010 - 10:09 PM
- - hurley97   Just so its clear, this isn't actually a group...   Feb 15, 2010 - 9:23 PM
- - rave2n   Hmm, thats quite expensive for those. The material...   Feb 25, 2010 - 9:25 AM
- - chacha   that would be a nice alternative....rooting for RA...   Feb 25, 2010 - 12:07 PM
- - rave2n   Very true on the other options. What I can do, wh...   Feb 25, 2010 - 2:04 PM
- - OOBE   Well, that's nice that you come forward with t...   Feb 25, 2010 - 4:09 PM
|- - rave2n   QUOTE (OOBE @ Feb 25, 2010 - 4:09 PM...   Feb 25, 2010 - 5:09 PM
- - Valo666   damn, where were these when I had my celica?? I ne...   Feb 25, 2010 - 4:58 PM
- - cjh4l22   nice! might have to do this with my suspension...   Feb 26, 2010 - 1:13 AM
- - Samflint1   I have bought a set of these bushes for my celica ...   Mar 29, 2010 - 4:53 AM
- - playr158   QUOTE (Samflint1 @ Mar 29, 2010 - 4...   Mar 29, 2010 - 7:39 AM
|- - Samflint1   QUOTE (playr158 @ Mar 29, 2010 - 8:3...   Mar 30, 2010 - 6:53 AM
- - hurley97   Yes, mine were stuck. You have to take a torch or ...   Mar 30, 2010 - 4:32 PM
- - CanadaCelica   Hi everyone, This weekend I am hoping to join all...   Jun 16, 2010 - 11:47 PM
- - azian_advanced   one thing i know for sure is that the GT-S came wi...   Jun 17, 2010 - 6:02 PM
- - CanadaCelica   Azian no, you are not supposed to tell me these th...   Jun 18, 2010 - 10:05 AM
|- - Galcobar   QUOTE (CanadaCelica @ Jun 18, 2010 - 8...   May 31, 2011 - 4:39 PM
- - SwissFerdi   I've never done this so I'm not sure, but ...   Jun 18, 2010 - 10:08 AM
- - garin   QUOTE (hurley97 @ Jan 14, 2010 - 10...   Jun 18, 2010 - 1:37 PM
- - 4-eyed-freek   i went 80 in a 35 before, i only did it once in my...   Jun 18, 2010 - 3:29 PM
- - CanadaCelica   Well some good news and some bad. The good is that...   Jun 18, 2010 - 3:55 PM
|- - dubb_head   QUOTE (CanadaCelica @ Jun 18, 2010 - 3...   Aug 1, 2010 - 2:20 PM
- - Batman722   and boom goes the dynamite   May 31, 2011 - 12:08 AM
- - hurley97   Dustin and I installed the fronts today... after s...   May 31, 2011 - 12:23 AM
- - jordisonjr   Where are you guys getting these bushings from? An...   May 31, 2011 - 9:47 AM
- - BonzaiCelica   very nice I don't think i'll ever get my...   May 31, 2011 - 12:17 PM
|- - jordisonjr   QUOTE (BonzaiCelica @ May 31, 2011 - 1...   May 31, 2011 - 1:50 PM
- - BonzaiCelica   QUOTE (jordisonjr @ May 31, 2011 - 1...   May 31, 2011 - 1:55 PM
- - jordisonjr   Oh cause I got the two's r us endlinks and did...   May 31, 2011 - 3:58 PM
- - hurley97   I'm all set with dropping my gas tank to do th...   May 31, 2011 - 5:21 PM
|- - Johnnyny   QUOTE (hurley97 @ May 31, 2011 - 6:2...   May 31, 2011 - 9:09 PM
- - Euphoria   QUOTE (hurley97 @ May 31, 2011 - 5:2...   May 31, 2011 - 7:36 PM
- - BonzaiCelica   thats not true the sway bars are a great improveme...   Jun 1, 2011 - 3:50 AM
- - Batman722   my coilovers are completely adjustable (32 ride ad...   Jun 1, 2011 - 5:58 AM
- - purplegt4   I just pm'd redrkt1. hopefully these are still...   Jun 1, 2011 - 9:48 AM
- - purplegt4   http://www.gt4-racing.eu/index.php/toyota-...spens...   Jun 1, 2011 - 9:57 AM
|- - purplegt4   QUOTE (purplegt4 @ Jun 1, 2011 - 9:5...   Jun 1, 2011 - 10:35 AM
|- - Johnnyny   QUOTE (purplegt4 @ Jun 1, 2011 - 11...   Jun 2, 2011 - 3:34 AM
|- - purplegt4   QUOTE (Johnnyny @ Jun 2, 2011 - 3:34...   Jun 2, 2011 - 10:35 AM
- - Culpable04   basically same price, I think he had some kind of ...   Jun 1, 2011 - 10:11 AM
|- - purplegt4   QUOTE (Culpable04 @ Jun 1, 2011 - 10...   Jun 1, 2011 - 10:18 AM
- - jordisonjr   Alright so I found out that I need to replace my F...   Jun 6, 2011 - 10:19 PM
- - S8S8   I'd be interested in a group buy for both sets...   Jun 7, 2011 - 3:53 AM
- - jordisonjr   Sorry couldnt wait and placed an order yesturday. ...   Jun 8, 2011 - 8:28 AM
|- - Ted95   QUOTE (jordisonjr @ Jun 8, 2011 - 9...   Jun 8, 2011 - 1:23 PM
- - czwalga   If this gets rolling i'd be in for a group buy...   Jun 8, 2011 - 2:29 PM
- - jordisonjr   Has anyone had problems putting the control arm ba...   Jul 12, 2011 - 7:34 PM
- - jordisonjr   Anyone?   Jul 13, 2011 - 12:02 PM
- - Batman722   The ones I've done they all just went right ba...   Jul 13, 2011 - 12:09 PM
- - jordisonjr   Great haha. Does that mean the my subframe is stri...   Jul 13, 2011 - 4:20 PM
- - zeus83   anyone tried replacing the front SS bushes...i gue...   Feb 26, 2012 - 1:52 PM
- - jordisonjr   Has anyone had issues with these wearing out fairl...   Aug 11, 2015 - 9:33 AM
- - Batman722   If you can move the arm/bushing then the bolt isn...   Aug 11, 2015 - 4:39 PM
|- - jordisonjr   QUOTE (Batman722 @ Aug 11, 2015 - 5...   Aug 12, 2015 - 8:29 AM
- - richee3   Those bushings have never even looked right in my ...   Aug 12, 2015 - 11:46 AM
|- - jordisonjr   QUOTE (richee3 @ Aug 12, 2015 - 12:4...   Aug 12, 2015 - 1:00 PM
- - richee3   Sounds exactly like mine. Like the control arm sit...   Aug 12, 2015 - 2:30 PM
|- - jordisonjr   QUOTE (richee3 @ Aug 12, 2015 - 3:30...   Aug 12, 2015 - 2:36 PM
- - richee3   I'm working on getting a replacement S54 but n...   Aug 12, 2015 - 2:51 PM
- - jordisonjr   Sorry man, Ill be sure to keep this thread updated...   Aug 12, 2015 - 4:12 PM
- - Batman722   One thing I noticed on other bushings I've put...   Aug 12, 2015 - 5:30 PM
- - richee3   It's actually sitting kind of decent right now...   Aug 12, 2015 - 7:38 PM
- - jordisonjr   That's almost exactly how mine looks as well, ...   Aug 13, 2015 - 8:35 AM
- - chacha   Sorry to bring up and old post, but need clarifica...   Jan 21, 2021 - 6:06 AM


Reply to this topicStart new topic
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 2:07 PM