Clutch not Disengageing, 3SGTE&5SFE swap Options

[Soulend]

Hey everyone,

I can't give SUPER details, because I'm in Japan atm, but my dad has been using my car while I've been on my trip, and in the past couple of weeks he's had some major problems with the clutch not completely disengaging, and now not at all.

when it started to have problems, my dad bled the clutch to see if there might be some air in the lines. he started to notice stuff in the lines, and decided to replace the slave cylinder. this helped and the clutch worked for a few days before he started to have problems again and eventually wouldn't disengage at all... so he replaced the Master cylinder and its still not disengaging.

he is extremely frusterated (and trust me his emails are bad enough to piss me off) and is probably going to take it to a shop on Monday. but before he spends the cash, I was wondering if there is anything he should look into or any tips on how to trouble shoot it?

I had him check the shifting cables and they are good, and the Clutch line is new and should be fine.

thanks for the help in advance,
Kevin

[Smaay]

i just changed a clutch in an ST yesterday. took me 3 hours