6G Celicas Forums

Welcome Guest ( Log In | Register )

> White / Grey Smoke on Boost
post May 31, 2011 - 11:00 PM
+Quote Post
wadeos



Enthusiast
*
Joined Sep 15, '10
From Levin, New Zealand
Currently Offline

Reputation: 0 (0%)




On boost my celica is smoking, its a white / grey smoke, and after a hard boost my car has a nice sweet smell ? I'm guessing my turbo seals have gone, but wouldn't the smoke be blue ?
My car is consuming abit of oil too which pushes me to believe the turbo seals have gone.
Any opinions ?


--------------------
 
Start new topic
Replies
post Jun 22, 2011 - 6:50 PM
+Quote Post
fiveS-FTE

Enthusiast

Joined Apr 22, '11
From Massachusetts
Currently Offline

Reputation: 0 (0%)




When your vehicle smokes White cloudy exhaust, it's usually from Coolant. If you say it's a sweet smell, you bet your ass it's coolant. Rats fall for that smell all the time, always fine dead rats on my coolant drain bucket at the shop. I'm assuming you slapped on your turbo without rebuilding your engine huh? When you add turbo it increases the compression, when your gaskets are already worn from normal driving then challenged with boost, it could be that you have a leak in your head gasket, more comenly dents or grooves in your head. That requires machining. But the deadliest on is a crack in your block or head that is leaking coolant into the combustion chamber.

If you want to test out if you really have a coolant leak, get a radiator funnel add coolant till half way. Let the car run until it reaches operation temperature. when it reaches that temperature the thermostat will release the coolant allowing it to circulate. If you see bubbles coming out the funnel there are air gaps in your radiator caused by leaks.

If you're cheap and don't want to buy a funnel, there is a messy way to do it. When car is cold open the radiator cap, fill the radiator till it's topped off run it, it will bubble because you added fluid for only 5 minutes. If it keeps going, there is a leak. When you are done with the test, the over flow will get rid of the access fluids.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 10:23 PM