GT-Four brakes, with pics *updated |
GT-Four brakes, with pics *updated |
May 29, 2010 - 12:21 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
first I bought these, st205 calipers, rotors, lines.
then to make them bolt on, I shaved off a few mm from the mounting points remove old pads and hardware and give a quick paint job then got new pads, shim kit, pins, ect and installed in the calipers next step is 1. getting the 205 rotors trimmed from 315mm to 298mm 2. getting spacers, either 10mm or 15mm (I need to test/measure, then install them) 3. bolt on (I'm not sure if I'm gonna tap my hub or use nuts/bolts), bleed lines, drive I'll update as I get things done. This post has been edited by Batman722: Jul 21, 2011 - 10:03 PM -------------------- |
Jul 28, 2011 - 7:20 PM |
|
Enthusiast Joined Apr 18, '11 From Southern Alabama Currently Offline Reputation: 1 (100%) |
Hey man wonderin if i could borrow or buy the snap ring tool i lost mine lol u know the one to place the snapring on the pistons
And welcome to the four piston world lol i love mines |
Lo-Fi Version | Time is now: November 23rd, 2024 - 3:35 PM |