![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 22, '10 From pomona, ca Currently Offline Reputation: 1 (100%) ![]() |
Sup guys, I just rebuilt my block, but I can't get it to run right....it starts n runs, but runs nasty n it stalls.i changed plugs, wires,cap, rotor, fuel filter, etc. with no luck.....i got a 94 gt manual trans. Plugs are gapped to .044. I dont think it's an injector issue, im running the stock ones. I also tried running some rx7 ones,but it still misfires. If I let the gas pedal go it stalls. Messing with the timing doesnt help eirher.I tried looking for vaccum leaks by spraying starting fluid around the intake n manifold areas, but the car runs the same...any ideas what it could be?
|
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 22, '10 From pomona, ca Currently Offline Reputation: 1 (100%) ![]() |
I think so, I had the crank set on the zero mark, and intake cam right in the hole. The exhaust cam was aligned with the dots on the intake gear...i think that sounds about right
|
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 4:10 PM |