Enders swap, Update 11/29/19 Options

[enderswift]

I'm ready

This post has been edited by enderswift: Nov 29, 2019 - 6:58 PM

[enderswift]

NICE. The Superstrut Suspension will help reduce torque steer and wheel hop. You'll definitely need it with that massive increase of torque you'll get from the swap. your going to use that heavy transmission that came with the engine!?? I heard that things weighs twice as much as the s54.

Well, I think the weight difference is made up for by the longer gear ratios and added strength. Plus I want to take on the challenge of converting the transmission. If it works then I'll put together a comprehensive thread detailing the process. If it doesn't work then I really wont lose anything.

Got the clip started!


Spent a good amount of time last night tracing and tagging all of the fuel and brake lines on the clip. Then I spent today taking apart the rear seats to reach the fuel pump. I had to do some investigating with the multimeter, but I eventually identified the power wires and confirmed their polarity. After that I attached fuel hoses to the pump and ran them to the corresponding lines on the clip. Next I wired the fuel pump directly to the battery and fired the beast up. Observe:

http://s74.photobucket.com/albums/i277/sub...=Firststart.mp4


It started like a champ, and I was amazed to find no engine codes. The whole point of this was to make sure that all the electronics were functioning. The startup confirmed that, and I was happy. Next step was to run proper compression test on a warmed up engine. So I let it run for 15 minutes before testing out my bonus turbo timer. Long story short I found 164 psi across all cylinders, which is simply perfect.

At this point my buddy asked me why I was even bothering to rebuild the engine at all, and I could see his confusion. My reasoning was that good compression numbers aren't everything; even a leak down wont tell you the whole story. For all I know this engine could be an oil burner that was beat on its whole life. Furthermore its going on 13 years old. I'd rather tear it down and start with a clean slate.

Plus rebuilding is fun

so the next order of business is to label EVERYTHING before taking various parts off and cataloging them. I plan to make a very detailed log of all the parts with pictures, notes, and hand drawn diagrams. I also have a million boxes from work just to keep everything labeled and organized. That way I wont get lost when I try to put this thing back together. Organization is key with a project like this.

anyway, tell me what you guys think and stand by for the next update

This post has been edited by enderswift: Sep 10, 2014 - 7:07 AM