Axle Trouble once and for all, Draw out what is what |
Axle Trouble once and for all, Draw out what is what |
Aug 18, 2011 - 9:48 PM |
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
Ok guys and Gals ...please answer the questions in the picture ...it realy conffusing...... if you cant read the words in the letter box click in the corner of pic to enlarge it This post has been edited by timdog1720: Aug 18, 2011 - 9:49 PM -------------------- Always fast and going for the look......
|
Aug 20, 2011 - 7:42 AM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
wtf guy ?
That question is answered 2 times in this thread. if you want to use an e153 tranny you need both inner axles from an MR2 turbo. Then you need the outer halves from an st185. Bolt them together, use a spacer if you want, and that's it. I'll use pictures so maybe you can understand because words aren't working. ^^ axles from 185 on the left and MR2 turbo on right. the GT, ST, ST205, ST185 axles DON'T FIT IN THE E153 TRANNY. MR2 inners DO. MR2 outers DO NOT FIT IN OUR HUBS. ST185 outers DO. GT, ST, and ST205 axles are in one peice, they DO NOT bolt together like the MR2 and st185 axles. so you put the MR2 turbo inners (that go into the tranny, driver and pass side) bolted up with st185 90-93 all-trac outers (driver and pass side because they fit in our Celica hubs). You dig ? If you ask another question that I've already answered it in this thread, I will erease my posts and give you all wrong info. -------------------- |
Aug 20, 2011 - 12:14 PM |
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
wtf guy ? That question is answered 2 times in this thread. if you want to use an e153 tranny you need both inner axles from an MR2 turbo. Then you need the outer halves from an st185. Bolt them together, use a spacer if you want, and that's it. I'll use pictures so maybe you can understand because words aren't working. ^^ axles from 185 on the left and MR2 turbo on right. the GT, ST, ST205, ST185 axles DON'T FIT IN THE E153 TRANNY. MR2 inners DO. MR2 outers DO NOT FIT IN OUR HUBS. ST185 outers DO. GT, ST, and ST205 axles are in one peice, they DO NOT bolt together like the MR2 and st185 axles. funny but yea i got it now its for both sides ...thanks brah so you put the MR2 turbo inners (that go into the tranny, driver and pass side) bolted up with st185 90-93 all-trac outers (driver and pass side because they fit in our Celica hubs). You dig ? If you ask another question that I've already answered it in this thread, I will erease my posts and give you all wrong info. -------------------- Always fast and going for the look......
|
Lo-Fi Version | Time is now: November 27th, 2024 - 9:40 PM |