6G Celicas Forums

Welcome Guest ( Log In | Register )

> Converting a ZR (ST204) to an AWD?, How is it done?
post Aug 22, 2011 - 9:50 AM
+Quote Post
KaneO

Enthusiast

Joined Aug 16, '11
From Australia, Vic, Portland
Currently Offline

Reputation: 0 (0%)




This is just out of curiosity and is thing that has been lingering in the back of my mind for a while. I know its possible but how and what needs to be done?? I've read so many forums on other sites about doing this but they all can't seem to give a down to earth answer on what actually is done to the car. In other words they seem to give completely different explanations or basic instructions from one another. Here in Australia GT4s are on the pricey side and a rare find.. So thought in the coming years a AWD conversion might an cheaper and beta (not necessary Easier) solution.

First Forum post by the way I am new to 6gc =P
 
Start new topic
Replies
post Aug 25, 2011 - 9:37 AM
+Quote Post
delusionz



Enthusiast
*****
Joined Feb 11, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




+ let me reverse that question on you. have you performed such a crash test on a car you've welded together like that and gotten a different result?

... didn't think so.


--------------------
Mike W
1996 Toyota Celica ST205 GT-FOUR
GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC
269awhp / 273ft-lbs

Posts in this topic
- KaneO   Converting a ZR (ST204) to an AWD?   Aug 22, 2011 - 9:50 AM
- - czwalga   Welding and patience. Unless you do all the work ...   Aug 22, 2011 - 3:21 PM
- - CelicaZR   Welcome General concensus is that its alot of m...   Aug 24, 2011 - 12:10 AM
- - Cuts_the_Pilot   You could spend more then the cost of a 205 and wh...   Aug 24, 2011 - 2:36 AM
|- - czwalga   QUOTE (Cuts_the_Pilot @ Aug 24, 2011 - 2...   Aug 24, 2011 - 7:43 AM
|- - stephen_lee   QUOTE (czwalga @ Aug 24, 2011 - 7:43...   Aug 24, 2011 - 8:11 AM
- - S8S8   First of all, welcome to another Aussie member. ...   Aug 24, 2011 - 6:20 AM
- - jmeyer   ^Winning^   Aug 24, 2011 - 8:08 AM
- - delusionz   good luck having a crash in a cut and welded car, ...   Aug 24, 2011 - 4:07 PM
|- - czwalga   QUOTE (delusionz @ Aug 24, 2011 - 5...   Aug 24, 2011 - 6:53 PM
|- - delusionz   QUOTE (czwalga @ Aug 25, 2011 - 11:5...   Aug 25, 2011 - 9:29 AM
- - Cuts_the_Pilot   Of course we all know the 205 wasnt cheap, they ac...   Aug 24, 2011 - 6:59 PM
|- - czwalga   QUOTE (Cuts_the_Pilot @ Aug 24, 2011 - 7...   Aug 24, 2011 - 7:35 PM
|- - hatchy_gt-s   QUOTE (czwalga @ Aug 24, 2011 - 8:35...   Aug 24, 2011 - 9:03 PM
|- - czwalga   QUOTE (hatchy_gt-s @ Aug 24, 2011 ...   Aug 25, 2011 - 6:22 AM
|- - Cuts_the_Pilot   So your saying that Toyota built a car that cannot...   Aug 25, 2011 - 7:34 AM
- - al94st   Lol, czwalga, I hope you survive a wreck with thos...   Aug 24, 2011 - 8:55 PM
- - Cuts_the_Pilot   No stickers here, they are badges , additionally i...   Aug 24, 2011 - 11:29 PM
|- - czwalga   QUOTE (Cuts_the_Pilot @ Aug 24, 2011 - 1...   Aug 25, 2011 - 6:17 AM
- - KaneO   Thanks for the info and the welcome to the forums ...   Aug 25, 2011 - 12:38 AM
- - jmeyer   First off I would like to congratulate you on owni...   Aug 25, 2011 - 7:45 AM
- - Cuts_the_Pilot   Found this one too, its has number plates so im as...   Aug 25, 2011 - 7:59 AM
- - delusionz   + let me reverse that question on you. have you pe...   Aug 25, 2011 - 9:37 AM
|- - czwalga   QUOTE (delusionz @ Aug 25, 2011 - 10...   Aug 25, 2011 - 12:08 PM
- - Culpable04   when is all this going to stop. some of us need t...   Aug 25, 2011 - 10:13 AM
|- - czwalga   QUOTE (Culpable04 @ Aug 25, 2011 - 11...   Aug 25, 2011 - 11:47 AM
|- - spy00005   QUOTE (Culpable04 @ Aug 25, 2011 - 11...   Aug 25, 2011 - 12:29 PM
- - jmeyer   It was on TV, it must be true!   Aug 25, 2011 - 10:14 AM
- - hatchy_gt-s   So op how are you liking your celica? You should s...   Aug 25, 2011 - 5:02 PM


Closed TopicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 5:51 AM