 Bucking/hesitating, 2nd gen 3sgte |
 Apr 14, 2011 - 9:05 PM
|
 
|
 Enthusiast  Joined Apr 23, '08 From Muskego,Wi Currently Offline Reputation: 8 (100%)  |
I've been cruising around on mr2oc and looking through pages of people having the same problem but never finding a answer to the problem.
It doesn't matter if the engine is hot or cold just driving normally I will experience a hesitation or bucking sensation when just going through the first couple gears. I change the bkr7e nkg plugs often now. Just threw a new set in. New cap/rotor/wires last fall. Just put a new coil on. Checked timing and its at 10* just like it should be. Used the smoke machine at work and smoked the entire intake system and tightened up any clamps that needed to be tightened on the intercooler piping. Anyone have any thoughts? Still does the same thing once in awhile. Next step for me is going to take a lab scope and do a TP sweep and see if there are any bad spots in the tp sensor itself. This post has been edited by Stambo: Aug 24, 2011 - 11:23 PM -------------------- 2nd Gen 3s-gte.... It lives!
97celiman "92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM" |
 |
Replies
|
Aug 25, 2011 - 9:27 PM
|
|
|
Enthusiast Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
my car pulls hard around 5 psi...because my turbo is dead it wont go past 8 psi but it still pulls
-------------------- |
Posts in this topic
Stambo Bucking/hesitating Apr 14, 2011 - 9:05 PM
lagos Im having the same problem. It seems its caused by... Apr 14, 2011 - 10:40 PM Stambo Good point. Do you know if one tooth off is 10*? I... Apr 15, 2011 - 9:11 AM Stambo Found out i needed to plug wires. They were ground... Apr 22, 2011 - 6:25 PM Stambo Happens again to me now. I've checked grounds ... Aug 24, 2011 - 11:23 PM Neon90424 Det? hot spots? Aug 24, 2011 - 11:33 PM Stambo detonation your thinking? No idea what would even ... Aug 25, 2011 - 6:53 PM
Stambo mine will pull all the way to 14psi Aug 26, 2011 - 1:38 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 9:43 AM |