Small picture recolection of latest mods, Celica Version 2.0 is on the works ! Options

[Culpable04]

Big thanks to Jim and Joe for their help, couldn't have done it without them.






Short exhaust clip !
Another one


before anyone ask

I have no power figures on the setup yet.

as for issues, so far i've had a bad trans ( replaced ) bad axle seals ( replaced ) and my latest discovery, a bad rear main seal, which I'll replace this coming saturday hopefully.

right nwo the car runs amazingly, still at stock boost, but it feels like a F-16 compare to my super 7a auto setup,

the setup is as follows,

3rd gen 3sgte
MR2 LSD trans
ATS cam gears
Berk tech downpipe
Tein coilovers
TRD short shifter
ACT heavy duty pressure plate with F1 racing Stage 4 sprung disc
Magnaflow high flow cat
Vibrant performance resonator
Skunk2 muffler
3 inch piping all the way back under the rear suspension


still have to install Blitz EBC and HKS FconV and water injection, but I"ll do that after I correct my leak isuue.


Paint used on the engine is VHT flat blackmost parts were cured in an Oven, except for turbo and throttle body.

This post has been edited by Culpable04: Aug 27, 2011 - 3:10 PM

[Culpable04]

after the accident, the car has sat for a while, but just a week ago I finally had some free time to pick up a new shell.
I have already started to work on it, small stuff, as the storm is keeping me from tearing into the engine compartment.

as of right now, interior is back together on the shell, ST205 fuel pump installed ( it came with a walbro which is noisier )

next week I'll be swapping the brakes and suspension, basically leaving the car ready just waiting for the engine to be dropped in.

I have also installed most of the water injection system in the new chassis.


I have no pictures to show at this time, but soon I will, I only work on the car 1 hr a day as time is not abundant, but this should hit the road pretty soon.