Enders swap, Update 11/29/19 Options

[enderswift]

I'm ready

This post has been edited by enderswift: Nov 29, 2019 - 6:58 PM

[enderswift]

Hey 6gc,

its been a while but there has been a lot of progress. I separated the transmission and placed it on its own pallet in the corner till the time comes for it to be converted to fwd. I also mounted the engine on its stand and continued labeling, photographing, and storing. As of right now the engine only has the turbo assembly and power steering pump on it. But unfortunately I'm not going to continue the disassembly for a little while since I have to turn my attention to the rest of the clip. I still need to pull out the superstrut, dash, and shifter cables. As soon as that happens I'm either going to chop up the frame or give it to my buddy so he can turn it into a giant grill ( I didn't ask for specifics haha).

if anyone wants to buy a rhd dash and firewall let me know!

anyway, here are some more current photos:



Here is my super heavy bench weight. It was tough to get this thing off of the block on my own but I managed in the end. Did anyone else forget that one hidden bolt behind the center housing?



My flywheel speaks volumes about how this car was treated in the past (bad). You can't tell in the photo, but there are blue spots all over this thing from what I can only assume to be massive clutch dumps. Things like this only reinforce my decision to rebuild this engine.



I finally got the harness off of the engine. I've been debating on whether or not I should put together a thread with a picture and description of each plug. I think it would be helpful to those who buy an engine set instead of a clip. Let me know if you guys would want something like that.



The flywheel isn't the only part telling stories. This is one filthy manifold.



I cant even imagine whats waiting for me under the valve cover, but if its anything like what I can see through the oil fill, then I have a lot of work ahead of me.



Intake valves look good though



This is a photo of the engine at the moment. I got stuck taking off the manifold and turbo and I have to think of a clever order. This thing is like a puzzle. You guys would not believe how heavily built (and braced) the stock downpipe is. I wouldn't be surprised if I saved 20 lbs by switching to an aftermarket pipe.



and heres a picture of my cramped working conditions. Its even tighter when I have the kawi in the garage O.O



The parts boxes just keep multiplying.

This post has been edited by enderswift: Jan 14, 2013 - 7:03 PM