 e-brake wont let go, everything is brand new |
 Sep 25, 2011 - 8:48 AM
|
 
|
|
Enthusiast  Joined Apr 19, '08 From Norway Currently Offline Reputation: 0 (0%)  |
When comparing the new and the old rotor, everything is the same, except the inner diameter on the center hole, which is around 0.5-1mm smaller on the new rotor. I've tried to refit the wheel, and force the rotor into place, without any luck. The rotor is 2-3mm from being where it should be.
Do i have the wrong rotor, or do i have to either expand the hole on the rotor, or decrease the diameter where its mounted? The car is a 97` 6GC T20 with rear disk brakes. The disks where bought for this exact model. EDIT: Look at the bottom for the new problem.. This post has been edited by skogs: Oct 3, 2011 - 10:01 AM |
 |
Replies
|
Sep 25, 2011 - 11:47 AM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
You probably need to loosen your ebrake cable because the old rotor have been worn down a little from them.
|
Posts in this topic
skogs e-brake wont let go Sep 25, 2011 - 8:48 AM
Galcobar If the centrebore is too small, go back to the sto... Sep 25, 2011 - 4:47 PM skogs Thats the answer i was hoping for! The old dis... Sep 26, 2011 - 2:32 AM Arsaces Is there a big difference going from the 10mm to t... Sep 26, 2011 - 9:39 AM
skogs QUOTE (Arsaces @ Sep 26, 2011 - 10:3... Sep 27, 2011 - 3:46 AM njccmd2002 i like the trout idea better. Sep 26, 2011 - 10:00 AM skogs The shop admitted the mistake, and gave me new dis... Sep 28, 2011 - 5:40 AM skogs I've now mounted everything. But after 2-3mins... Sep 30, 2011 - 2:49 AM SwissFerdi Hand brake too tight? Sep 30, 2011 - 2:15 PM Bitter if you put both wheels up in the air, do they spin... Sep 30, 2011 - 5:59 PM Galcobar Presuming I understand your question:
If the cali... Sep 30, 2011 - 8:34 PM skogs Excellent replys as always:) You're absolutely... Oct 1, 2011 - 7:16 AM trdproven if it is the wrong ones, explain the crack is beca... Oct 3, 2011 - 12:56 AM skogs The hammer method worked absolutely perfectly. Whe... Oct 3, 2011 - 2:51 AM skogs I disassembled the rotor again, and found that the... Oct 3, 2011 - 9:59 AM purplegt4 QUOTE (skogs @ Oct 3, 2011 - 10:59 A... Oct 3, 2011 - 10:27 AM skogs I changed one of the new shoes with one of the old... Oct 3, 2011 - 1:26 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 12:03 AM |