![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) ![]() |
Has anyone ever put a dual exhaust on a gt-four, I ordered a 40 series and 2 resonated pilot stainless steel exhaust tips and am going to change the ebay turbo muffler I have before the launch control blows it to ****.
My questions is has anyone routed the exhaust pipe around the gas tank and will I have to heat wrap it to not warm up my gas too much and...is there even room>? -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Mar 3, '05 From Richmond, B.C. Currently Offline Reputation: 0 (0%) ![]() |
90-degree bends are the equivalent of adding roughly 8 feet of additional piping to your exhaust setup. Dual exhausts gain no flow value when coming off a single bank, and potentially introduce much higher flow inefficiency by splitting the exhaust stream and allowing it to expand and cool -- which means it slows down. This defeats the whole point of the exhaust system, to get the exhaust gases out of your engine as quickly as possible with the lowest pumping losses.
|
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 8:46 PM |