colt cams dyno results!, 5sfe + colt cams = MOAR POWAAA!! Options

[presure2]

hey guys, a couple weeks ago, i installed a set of colt cams for zac (6g96gt).
he got a mild grind, so i was just as anxious to see what kinda gain he would get from them VS stock, and the mild webcams that I had on the 5sfte.

i forgot my thumb drive, so ill have to go back to get the runfiles to be able to overlay the runs, but just by the numbers, he made 135whp, uncorrected, and ~ 140ftlbs IIRC. he has some printouts that im sure he'll post later tonight when he gets home.

dustin made ~123whp with the webcams, but the powerband is quite diffrent between the 2. the coltcams are definetly smoother, with more overall gains, where the webcams were much peakier, with all the gains coming above 4K rpm. once i get the runfiles, ill be able to illustrate this much better, with more details.
for now, i will add a pic i took while tuning it at the dyno.
it shows 2 runs.
the blue one is when we first got there, without any tuning, the red one is after a handful of runs of playing with the SAFCII.
blue run = 115.16whp, 131.06ftlbs with STD correction.
red run = 128.61whp and 140.17ftlbs with STD correction.



goes to show its definetly worth it to pick up and dyno tune a SAFC or somthing after mods like this..hell, even stock you can probably gain 10-15whp from an SAFC by leaning the fuel curve some.
enjoy zac!

[6G96GT]

Congrats zac on the dyno results! Manny does great work I can back him up that that, he did a great job on my IC piping and b-pipe. How does the car idle? Fairly smooth still with the mild grind?

Thanks man, yeah the car idles almost like stock with just a tiniest bit of interruption. Soon as I get it into first though, it's very smooth from 0 to red line - I couldn't be happier with how it's all worked out with the cams and safc.