 Issue Installing OEM Struts...Help, Springs arent sitting the way they are suppose to be. |
 Oct 16, 2011 - 3:23 PM
|
 
|
|
Enthusiast Joined May 13, '10 From cordes lakes Currently Offline Reputation: 0 (0%)  |
I have a 1994 ST model Celica. I replaced my 2 front struts for matience, and thank god i did, both of the front struts were bad. they did not come back up when being pressed down. Anyways, my problem is, is that when i replaced my struts and went out for a test drive and came back, i noticed the coil springs were not sitting right. on one side the top isnt in the groove and the bottom is bearly hanging over the edge, for some reason the springs are not sitting right i tried everything to get them in the groove but they are not wanting to go in, so i was wondering if the springs have to be turned or facing a certain way? i know i got the springs right side up, they are variable rate springs so i made sure to have them the right way. but does anyone know if the springs have to be turned or facing a certain way??? the springs deffinatly dont look right, and i would hate to drive over a bump then have my car ride weird.
This post has been edited by rapid3642: Oct 16, 2011 - 3:25 PM |
Posts in this topic
trdproven when you reinstall the springs uncompressed you al... Oct 16, 2011 - 11:55 PM rapid3642 Hey thanks, and yea i compress them before i undid... Oct 17, 2011 - 10:25 AM trdproven yea the bottom side is easier cus it has to sit th... Oct 17, 2011 - 9:50 PM
xrav22 QUOTE (trdproven @ Oct 17, 2011 - 9... Oct 21, 2011 - 11:18 AM trdproven I never had problems with a spring compressor but ... Oct 21, 2011 - 6:27 PM njccmd2002 most mistakes come from the superior plate not bei... Oct 23, 2011 - 8:08 AM kamax ok, on topic here. the top plate have 3 little ho... Nov 4, 2011 - 3:23 PM kamax nvm -_-;; Nov 4, 2011 - 4:14 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 9:49 PM |