6G Celicas Forums

Welcome Guest ( Log In | Register )

> Couldn't get Wheel Alignment because of Modifications?
post Oct 21, 2011 - 4:26 PM
+Quote Post
DIONYZUZ

Enthusiast
*
Joined Oct 29, '09
From Chicago
Currently Offline

Reputation: 2 (100%)




The modification I have gotten were KYB GR-2 Struts and Tein lowering springs with 225 45 17" wheels. I tried getting a wheel alignment today but the mechanic said my suspension and wheels were "unsafe" on my celica. He went on stating that the wheel alignment machine could not align the wheels because of the lowering which affected the camber and caster. He said it requires a new bolt for the caster , but the caster is so so far off that the replacement wont even help the caster. Then he suggested to go back to OEM suspension and said "I owned a Celica GT before and those suspensions are already a sport suspension." Then he said the tires will rub and thats the main reason why there is a pull on the vehicle's steering which is what I believe is the reason it needed an alignment, but it doesn't even feel like theres rubbing. Should I get the new bolts and try another alignment? From what the mechanic said, it seems like nothing will help the alignment.
 
Start new topic
Replies
post Oct 21, 2011 - 6:18 PM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




go somewhere else, these are couple scenarios

1. your setup right now is not even that low so they should be able to align it assuming, you don't have worn suspension parts/steering parts. < ideal
2. Some places charge more to do lower cars, they remove warranty, and they'll still align it but only get it as close as they can but not exact, if you get the camber bolts, etc. it would help but then you would have to have really bad camber, or slammed on coilovers.

This post has been edited by trdproven: Oct 21, 2011 - 6:28 PM


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)
post Oct 21, 2011 - 8:13 PM
+Quote Post
xrav22



Enthusiast
**
Joined Jul 24, '08
From Canoga Park CA.
Currently Offline

Reputation: 0 (0%)




QUOTE (trdproven @ Oct 21, 2011 - 6:18 PM) *
go somewhere else, these are couple scenarios

1. your setup right now is not even that low so they should be able to align it assuming, you don't have worn suspension parts/steering parts. < ideal
2. Some places charge more to do lower cars, they remove warranty, and they'll still align it but only get it as close as they can but not exact, if you get the camber bolts, etc. it would help but then you would have to have really bad camber, or slammed on coilovers.

Your camber should not be off, I lowered mine 1.5(more like 2) and it just brings the strut together closer no angle change. Now on the other hand my car was pulling left when i bought it and I had an alignment which didn't work. I found my strut bottom and top plate were twisted throwing off my wheel angle o the pass side. After I changed shocks and got everything in order I was going straight as an arrow. Keep in mind I had to put the rear tires up front to go straight as the fronts were worn at an angle
from the shock problem. What I am saying you need to use new tires to see if it is fixed. Or at least good ones.
Good luck

Posts in this topic
- DIONYZUZ   Couldn't get Wheel Alignment because of Modifications?   Oct 21, 2011 - 4:26 PM
- - BonzaiCelica   He's right but also wrong. It is not necessary...   Oct 21, 2011 - 4:43 PM
|- - Needles   I have a set of KYB gr2 with Tanabe DF210 2.2 inch...   Oct 21, 2011 - 5:12 PM
- - DIONYZUZ   I was looking for the 'cheapest' wheel ali...   Oct 21, 2011 - 5:29 PM
- - trdproven   go somewhere else, these are couple scenarios 1. ...   Oct 21, 2011 - 6:18 PM
|- - xrav22   QUOTE (trdproven @ Oct 21, 2011 - 6...   Oct 21, 2011 - 8:13 PM
|- - DIONYZUZ   QUOTE (xrav22 @ Oct 21, 2011 - 8:13 ...   Oct 21, 2011 - 10:29 PM
|- - trdproven   QUOTE (xrav22 @ Oct 22, 2011 - 11:13...   Oct 22, 2011 - 6:09 AM
- - 808celica   just be happy they can get you car up on the align...   Oct 21, 2011 - 11:25 PM
|- - DIONYZUZ   QUOTE (808celica @ Oct 21, 2011 - 11...   Oct 22, 2011 - 12:52 AM
|- - smkr3w   QUOTE (DIONYZUZ @ Oct 22, 2011 - 12...   Oct 22, 2011 - 4:52 AM
- - chacha   don't take the shortcuts to finding a cheap au...   Oct 22, 2011 - 12:40 AM
|- - DIONYZUZ   QUOTE (chacha @ Oct 22, 2011 - 12:40...   Oct 22, 2011 - 12:55 AM
- - BonzaiCelica   or that is.... unless you installed suspension an...   Oct 23, 2011 - 1:09 AM
- - Stambo   I use our alignment machine at work often, atleast...   Oct 26, 2011 - 8:45 PM
|- - Needles   QUOTE (Stambo @ Oct 26, 2011 - 8:45 ...   Oct 26, 2011 - 9:04 PM
|- - DIONYZUZ   QUOTE (Stambo @ Oct 26, 2011 - 9:45 ...   Oct 26, 2011 - 10:06 PM
- - Stambo   After lowering my car and doing an alignment on it...   Nov 1, 2011 - 1:32 PM
- - lagos   QUOTE (DIONYZUZ @ Oct 21, 2011 - 4:2...   Nov 10, 2011 - 4:41 PM
- - Lenny   i'm a mechanic and i gotta say he's wrong ...   Nov 12, 2011 - 12:54 PM
- - stephen_lee   MIDAS tried this with me. said i needed crash bolt...   Nov 12, 2011 - 11:42 PM


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 7:13 AM