 5SFTE project, got a few questions |
 Oct 28, 2011 - 12:00 PM
|
 
|
|
Enthusiast  Joined Sep 22, '10 From pomona, ca Currently Offline Reputation: 1 (100%)  |
hey whats up guys, im in the process of turbo charging my 94 gt. everything is pretty much stock. i just rebuild the whole engine and ported and polished the head. i got all my parts ready, just had a few questions here they are:
i got some rx7 460cc injectors: are these too big, if im just gonna run about 10psi? i was also looking to buy a water/meth injection kit, will this benefit me if again, im running about 10 psi? i was also thinking of getting something to control the ignition timing ( MSD BTM), do i really need it " " " " " "? lastly, is it safe to run more than 10 psi on the stock block with the above components? any input/ recommendations is greatly appreciated =] my set-up: 460cc rx7 injectors 26x12x3 FMIC/ 2.75" piping generic t3t4 turbo, trim .50, a/r .63 SSBOV AEM wideband 02 stock fuel pump |
 |
Replies
|
Nov 3, 2011 - 1:49 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
You obviously didn't read the thread I linked.
I ran almost 17psi, controlled by an safc on shannons car, and still had to pull fuel, with the same turbo you want to run. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
batcavee00 5SFTE project Oct 28, 2011 - 12:00 PM
presure2 QUOTE (batcavee00 @ Oct 28, 2011 - 1... Oct 28, 2011 - 5:01 PM batcavee00 thanks for all that info!
made a bit more re... Nov 2, 2011 - 4:53 PM Smaay not with the 460's those are big enough to run... Nov 3, 2011 - 8:54 AM
Smaay well there is your answer, i was just being conser... Nov 4, 2011 - 10:52 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 4:25 AM |