Rear Caliper Bolt |
Rear Caliper Bolt |
Jul 20, 2008 - 10:23 PM |
|
Enthusiast Joined Sep 6, '04 From Canada Currently Offline Reputation: 0 (0%) |
Hey everyone, I was wondering if anyone knew what the size of the rear caliper bolt is. I broke mine while changing my rear pads.
Thanks |
Nov 6, 2011 - 6:09 PM |
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Typically you would drill a smaller hole in the center and use an extraction kit to back it out. It's pretty simple. Don't try to drill it out with a bit of the same diameter. You will not do it properly.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
Nov 7, 2011 - 10:10 AM |
|
Enthusiast Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
Typically you would drill a smaller hole in the center and use an extraction kit to back it out. It's pretty simple. Don't try to drill it out with a bit of the same diameter. You will not do it properly. You can get a new caliper bolt and bracket at rock auto. com but the quality is kinda weak. I had a bolt that was stripped cause someone forced it at an angle. Caliper brackets are around 16 bucks. Make sure to put in the notes please inspect just for the hell of it. |
Lo-Fi Version | Time is now: November 27th, 2024 - 3:39 AM |